Set Up The Active-Backup Mode - ZyXEL Communications ZyWALL 110 Handbook & Instructions

www.zyxel.com
LACP rate:
The interval can be fast (every second) or slow (every 30 seconds).
Balance-alb Mode:
(Does not require configuration on the switch and one or multiple switches can be
used.)
Figure 241

Set up the active-backup mode.

The VLAN interface is cross-connected to different switches and the link statuses on
both switches are active.
Figure 242
In this case, the LAG interface mode must be set to Balance-alb.
Figure 243
164/255