How To Setup And Configure Email Logs - ZyXEL Communications ZyWALL 110 Handbook & Instructions

How to Setup and Configure Email Logs

This example shows how to set up the e-mail profiles to mail ZyWALL/USG log
messages to the specific destinations. You can also specify which log messages to
e-mail, and where and how often to e-mail them. When the Email Logs is configured,
you will receive logs email report base on customized schedule.
Figure 263 ZyWALL/USG Setup and Configure E-mail Logs
Note: All network IP addresses and subnet masks are used as examples in this
article. Please replace them with your actual network IP addresses and subnet
masks. This example was tested using USG110 (Firmware Version: ZLD 4.15).
www.zyxel.com
175/255