Torch Adapter Thumb Screw Replacement - ESAB fabricator 141i Service Manual

ESAB FABRICATOR 141i

4.15 Torch Adapter Thumb Screw Replacement

All power to unit should be removed.
1. Place unit on its back.
2. Remove 2 screws in bottom of the front panel. A securing block will become detached and fall free from the front panel
as you turn each screw out. Set these aside for reassembly. Leave screws sitting in the pockets of the panel.
OPERATION
WARNING
Screws
Art # A-11483
4-18
A-12958
Securing Block
Manual 0-5448