Options And Accessories - ESAB fabricator 141i Service Manual

10.01 Options and Accessories

DESCRIPTION
Fusion 140A MIG Gun, 10ft (3.0m) Length
ESAB Spool Gun 160A,12ft (3.6M) Length, suits 4" (100mm) spools for alumini-
um welding
TIG Torch, 17V, 12.5 ft, 8 pin and accessory kit with 1/16", 3/32", 1/8" thori-
ated tungstens; 1/16", 3/32", 1/8" collets; 1/16", 3/32", 1/8" collet bodies; No.
5, 6, 7 Alumina nozzle; short back cap; long back cap
Fabricator 141i- 181i Carry Bag
Basic 4 Wheel Cart
Foot Control for remote amperage control when TIG welding
ESAB WeldSkill Auto-Darkening Helmet Skull & Fire (USA Only)
Drive Roll .023" - .035" (0.6-0.9mm) V groove for steel & stainless steel
Drive Roll .023"- .030" (0.6-0.8mm) V groove for steel & stainless steel wires
[Fitted]
Drive Roll .035"/.045" (0.9/1.2mm) V groove for steel & stainless steel wires
Drive Roll .030"-.035" (0.8-0.9mm) U grooved for aluminum wires
Drive Roll .040"-.045" (1.0-1.2mm) U grooved for aluminum wires
Drive Roll .030"-.035" (0.8-0.9mm) V knurled groove for flux cored wires
Drive Roll .045" (1.2mm) V knurled groove for flux cored wire
STICK KIT, 25mm DINSE
WTL ground clamp with 16 mm
WTL electrode clamp with 16 mm
Victor Argon Flowmeter/ Regulator
Accessory Kit for TIG Torch with 1/16", 3/32", 1/8" thoriated tungstens; 1/16",
3/32", 1/8" collets; 1/16", 3/32", 1/8" collet bodies; No. 5, 6, 7 Alumina nozzle;
short back cap; long back cap
Power Adapter, 115V, 20A- 15A
Manual 0-5448
SECTION 10:
OPTIONS AND ACCESSORIES
lead and 25 mm dinse, 10ft (3.1m) long
2 2
lead and 25 mm
2 2
Table 10-1: Fabricator 141i Options and Accessories List
dinse, 13ft (4m) long
10-1
ESAB FABRICATOR 141i
PART NUMBER
F140TA-10-3035 1017-1321
SG160TA-12-3035 1027-1390
W4013802
W4015301
W4014700
600285
4100-1004
W4014800
7977036
7977660
7977731
7977264
7977732
704277
W4009401
0781-4169
P062900010
W4013300
ACCESSORIES