Table of Contents
Advertisement
3. Open the wire compartment door and release the tension knob so the pressure arm and tension knob hang downwardly.
Pressure Arm
4. Gently push the bottom of the front panel upward until the thumb screw is fully exposed.
5. Remove damaged thumb screw and replace with new one.
6. To reassemble, reverse steps 1 through 4.
Manual 0-5448
Tension Knob
Art # A-11484
Thumb Screw
Fully Exposed
Art # A-11485_AB
Art # A-11486
ESAB FABRICATOR 141i
Push Upward
4-19
OPERATION
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
