Volt-Ampere Curves - ESAB fabricator 141i Service Manual

ESAB FABRICATOR 141i
9. On all cylinders, open the valve completely to seal the valve packing. On gaugeless flowmeters/ regulators, the indicator will
register the cylinder contents open.
CAUTION
!
Keep the cylinder valve wrench, if one is required, on the cylinder valve to turn off the cylinder quickly, if
necessary.
10. Attach the desired downstream equipment.

3.09 Volt-Ampere Curves

Voltage-Amperage Curves shows maximum voltage and amperage output capabilities of welding power source. Curves of other settings
fall between curves shown.
60
50
40
30
20
10
0
SAFETY AND INSTALLATION
Figure 3-3: Open Cylinder Valve
Fabricator 141i
MIG (GMAW/ FCAW)
STICK (SMAW)
0 10 20 30 40 50 60
Welding Current (Amps)
Figure 3-2: Fabricator 141i Volt-Ampere Curves
Art # A-09828
TIG (GTAW)
70 80 90 100 110 120 130 140 150
3-8
Art # A-11807
Manual 0-5448