Advertisement
Relay 1
Relay 2
Electronic Overload
Motor Thermistor Input
Auto-Reset (Times)
Drive Programming
Auto-Tune
In the event that it is desired to "auto-tune" the drive to the connected motor, reference the following
instructions along with the AF 600 FP User's Guide (DET – 609):
With power applied to the panel –
1) Place the Hand/Off/Auto, and Drive1/Off/Drive2 selector switches in the "Off", and "Drive1" positions
respectively.
2) For Full Auto tuning follow the instruction below
Quick Menu
Ok
Quick start
Ok
Once Up arrow
Ok
P-04 Auto Tuning
Ok
[1] Full Auto tune
Ok
Follow the Keypad direction
Auto tune".
DEH40634
(E24)
Set to "9" Alarm
(E24)
Set to "5"Running
(F10)
Set to "4" Elec OL Trip 1
(F12)
Set to "0" None
(H04)
Set to "13" Infinite Auto Reset
Note: If the panel has a load reactor, select "Reduced
16
AN 11-1018 Rev.02, 09/26/2011
Hide quick links:
Advertisement
