Advertisement
SERVICE
INFORMATION
27
Appliances which require electrical power are equipped
Followtheseprocedurestoremoveapplianceforcleaningor
with a three-prong grounding plug which must be
servicing:
plugged directly into a properlygrounded three-hole 120
volt electricaloutlet.
1. Shut-off gas supplyto appliance.
2. Disconnect e lectricalsupplyto appliance,if equipped.
3. Disconnectgassupplytubingto appliance.
4. Slide range forward to disengage range from the anti-tip
bracket.)bracket"
(See Installation Instructions for location of
__
5. Reverse procedure to reinstall. If gas line has been
disconnected, check for gas leaks after reconnection.
(See installation Instructions for gas leak test method.)
A qualified servicer should disconnect and reconnect the
Always disconnect power to appliance before servicing.
gas suppy.
To prevent range from accidently tipping, range must be
The three-prong grounding plug offers protection against
securedtothefloor bysliding rearlevelingleg intoananti-tip
shock hazards. DO NOT CUT OR REMOVE THE THIRD
bracketsupplied withthe range.
GROUNDING PRONG FROM THE POWER CORD PLUG.
WARNING: Possible risks may result from abnormal
usage,includingexcessive loadingof the oven doorand of
If an ungrounded, two-hole or other type electrical outlet is
the riskof tip over,should the appliance not be reinstalled
encountered, it is the personal responsibility of the
accordng tothe installat o n instruct o ns.
appliance owner to have the outlet replaced with a
properly grounded three-hole electrical outlet.
Advertisement
