NETGEAR Arlo Go User Manual page 41

You can use the sliders to adjust the sensitivity of the motion sensor:
• Raise the sensitivity percentage to increase the number of videos that the
Arlo Go camera captures.
• Lower the sensitivity percentage to decrease the number of videos that the
Arlo Go camera captures.
Note:
If you're not sure what motion sensitivity to use, you can use the motion detection
test after you finish creating the mode. Go to your camera's settings to turn on the motion
detection test.
9. Select the device that you want to record video when motion or audio is
detected and tap or click Next.
If you only use one device, your device is preselected.
10. Specify what you want your device to do when motion or audio is detected.
You can select Record video or Do nothing.
11. If you want to turn on the Arlo Go alarm when the device detects motion or
sound, select the Turn Alarm ON check box.
12. Tap or click Next.
13. If you selected Record video, use the slider to specify how long you want your
device to record when motion or audio is detected and tap or click Next.
14. If you selected Turn Alarm ON, set the sliders for Alarm Duration (in seconds)
and Alarm Loudness and tap or click Next.
15. Select the notifications that you want to receive.
16. If you are using the Arlo mobile app, tap Next.
17. If you selected Send email alert, enter the email addresses that you want to
receive alerts.
18. If you are using the Arlo mobile app, tap Next.
If you are using a web browser, click Finish.
19. Review the summary of your settings and tap or click Save.
Your new mode is saved. You can now select it from the mode menu.
Modes, Rules, and Smart Alerts
41