View The Sd Card Status - NETGEAR Arlo Go User Manual

3. Insert the SD card into the SD card slot on the camera.
4. Press the edge of the SD card until it is completely seated in the slot.
5. Close the battery door.
6. Reboot the Arlo Go camera.
You must reboot the Arlo camera after installing an SD card.

View the SD Card Status

The Arlo app notifies you if the SD card is getting full or if the SD card is not the
correct format. You can also use the Arlo app to view the SD card status.
¾ To view the status of the SD card for a camera:
1. Tap the Arlo icon
If you are using a computer, enter
browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of cameras displays.
3. Tap or click the camera.
The camera settings display.
4. In the Storage section, tap or click SD Card.
The SD Card Status shows whether the SD card is ready, needs to be formatted,
or is full.
Use an SD Card With Arlo Go
SD card slot
on your mobile device.
arlo.netgear.com
25
in the address bar of a