Dial 611 from any AT&T wireless phone or 800.331.0500. When prompted, enter your device’s 10-digit number. Mount screws To get the 10-digit number, open the Arlo app, select your Arlo Go Rechargeable camera’s settings, and check your network phone number.
For the best experience, download the Arlo app for your smartphone by scanning this QR code. The Arlo Go camera comes with an AT&T SIM card installed. If a SIM card is not installed, insert a card into the SIM card slot..
Set Up Your Arlo Go Camera Into Your Arlo Go Camera Use the Arlo app and your Arlo account to set up your Arlo Go camera. If you already set up an Arlo account, you can add the Arlo Go camera to If power is available, you can plug your camera in and use it in powered your account.
Page 5
¾ To create a new Arlo account: ¾ To add an Arlo Go camera to an existing Arlo account: Launch the Arlo app from your smartphone, tap New to Arlo? If you already set up an Arlo account, log in, and click or tap Add and select Arlo Go.
Place Your Camera ¾ To mount the camera on a wall: You can place your camera on a flat surface or mount it. Place the wall plate and secure it with three screws. If you’re mounting the camera to drywall, be sure to use the included plastic wall anchors.
Arlo Go Access and Cloud Storage The Arlo Go battery is partially charged when it leaves the factory. The Arlo Go camera is designed to connect to the AT&T network.* During setup, you can add the camera to your Arlo account.
You’re Done! Camera LED Guide Congratulations! Your Arlo Go camera is set up and ready to go. To view useful tutorial videos, find troubleshooting tips, or get support, Solid amber Very slow blinking visit support.arlo.com. No SIM card is inserted...