Camera Led Guide - NETGEAR Arlo Go User Manual

Camera LED Guide

The Arlo Go camera LEDs light in different colors to indicate how the camera is
operating.
Solid blue
The camera is registered and is connected to
the mobile network.
Very slow blinking blue
The camera is powering on.
Slow blinking blue
The camera is ready to scan the QR code.
Blinking blue
The camera is scanning the QR code.
Fast blinking blue
The camera is connected to the cloud.
During charging, blinking for three seconds
indicates that charging started and blinking
for two seconds indicates that charging is
complete.
Blinking blue and purple
The camera is connecting to the network and
the cloud.
Set Up Your System
Solid amber
No SIM card is inserted or the SIM card is damaged.
During a sync, the battery charge is low.
During the motion detection test, motion is detected.
Blinking amber
Mobile network coverage is not available.
Slow blinking amber
The battery level is low.
Double blinking amber
The battery level is so low that it is critical.
Blinking amber and purple
The SD card type is invalid.
Blinking amber and blue
The camera is receiving a firmware upgrade.
Fast blinking amber
The camera connected to the cellular network but it
cannot connect to the cloud.
During a QR code scan, the scan failed.
During battery charging, the charge failed.
For more information about connecting to the cloud,
tinyurl.com/h8csb5a
visit
16
or scan this QR code: