Page 2
What’s Included Welcome Base station Arlo Wire-Free Lithium CR 123 batteries* camera (VMB3500) Thank you for choosing Arlo. Getting started is easy. Base station Ethernet cable Wall mount* Mounting screws power adapter and anchors* * Quantity varies with number of cameras...
Get the App Connect Your Base Station to the Internet For the best experience, download the Arlo app for your smartphone by scanning this QR code or a. Connect the base station to your router using the Ethernet cable that is included.
Reset SYNC Ethernet ¾ To add an Arlo camera to an existing Arlo account: If you already set up an Arlo account, log in, and click or tap Add Device. (If this doesn’t happen, visit Follow the onscreen instructions. arlo.com/support/...
Insert Batteries Into Your Cameras Sync Your Cameras With the Base Station a. Unlock the battery c. Insert two batteries d. Insert two batteries e. Close the Note: Cameras must be synced one at a time. compartment by near the back of the near the battery door.
Page 6
b. Press the Sync button on the back of d. Press the Sync button on top of the Syncing more than one camera? A blue LED on the camera blinks slowly the base station for about two seconds. camera for about two seconds. Release when the sync process starts.
Tip: Use the Arlo app in Position mode If you’re mounting the camera to drywall, (found in Camera Settings) to help aim the camera. be sure to use the plastic drywall anchors that are provided.
You’re Done! Base Station LED Guide Power Internet Camera Congratulations! Your Arlo System is set up and ready to go. Green Green Green The base station The base station Cameras are is powered on. is connected to connected to the To view useful tutorial videos, find troubleshooting tips, or the Internet.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.