What’s Included Welcome Thank you for choosing Arlo. Outdoor power adapter Arlo Go wind bracket Arlo Go Getting started is easy. (varies by region) USB port cap...
Safety Guidelines Temperature • When you use the outdoor power adapter, do not place your • The outdoor power adapter can be used when the camera on a flat surface without an Arlo outdoor mount. temperature is 32–122ºF (0-50ºC). • Install the provided wind brackets for support between the •...
Installation Choose a location to mount your Slide the wind bracket onto the camera and install the outdoor power adapter cable. mount first. The wind bracket supports the connection of the power adapter Remove the USB port cap from cable to your camera. the camera.
Page 5
Press the tab on the cable Connect the cable connector connector into the to the USB port on your bottom of the USB port. camera and press in firmly.
Page 6
Slide the wind bracket Connect the power adapter along the cable until to a protected electrical it fits tightly against outlet. the camera and align Note: If you decide to use the the bracket hole with camera wire-free, plug the camera screw a replacement USB cap threads.