What’s Included Lithium 123 batteries Welcome 100% wireless camera Thank you for choosing Arlo. Getting started is easy. Mounting Magnetic wall screw mount...
Insert Batteries Unlock the battery Insert two batteries near Insert two batteries near Close the battery door. compartment by sliding and the back of the camera. the compartment hinge. holding the latch. Slide the battery door back and lift it to open the compartment.
Page 4
Sync Your Camera with a Base Station Press the Sync button on the side of the base station for two Bring the camera within one to three feet of the base station. seconds. Release the button. Your base station will look like one of the following. Wait for the sync status LED to blink green.
Page 5
Press the Sync button on top of the camera for two A blue LED on the camera blinks slowly when seconds. starting the sync process. The blue LED blinks rapidly to confirm sync. Release the button. The camera is ready for viewing. Note: Cameras must be synced one at a time.
Page 6
Congratulations! and click or tap Add Device. Your Arlo camera is set up and ready to go. If you are using a computer, visit arlo.netgear.com. To view useful tutorial videos, find troubleshooting tips, or get support, Follow the onscreen instructions.