Table of Contents
Advertisement
A+ SERVER 2022TC-BIBQRF/BTRF USER'S MANUAL
1-2
Serverboard Features
At the heart of the A+ Server 2022TC-BIBQRF/BTRF lies four H8DCT-F/IBQF
dual processor motherboards based upon one AMD SR5670 chipset and one SP5100
Southbridge chipset. Below are the main features of the H8DCT-F/IBQF.
Note that the features on each board are quadrupled for the server, which includes
four nodes.
Processor
Each H8DCT-F/IBQF supports up to two AMD
(AMD Socket C32 type) processors. Please refer to our web site for a complete
listing of supported processors (www.supermicro.com).
Memory
Each H8DCT-F/IBQF serverboard has twelve (12) dual channel DIMM slots
that can support up to 64 GB of ECC/Non-ECC UDIMM or up to 192 GB of ECC RDIMM
DDR3-1600/1333/1066 Mhz Mhz speed in 1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size
SDRAM of 1.5V or 1.35V voltages.
Onboard SATA
A SATA controller is built into the AMD SP5100 chipset to provide support for a four
port, 3 Gb/sec Serial ATA subsystem, which is RAID 0, 1 and 10 compatible.
PCI Expansion Slots
Each H8DCT-F/IBQF has one (1) PCI-Express x16 Gen. 2 slot.
Onboard Controllers/Ports
Onboard I/O backpanel ports include one COM port, a VGA port, two Gb LAN ports, a
dedicated IPMI LAN port, two USB ports and one single QSFP InfiniBand connector
(2022TC-BIBQRF only). Two USB headers are included on the motherboard.
Other Features
Other onboard features that promote system health include voltage monitors, a
chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors and virus protection.
®
1-2
Opteron
®
4000 series
Advertisement
Table of Contents
