Planet Networking & Communication igs-801m User Manual page 31

If there are two LAN cards or above in the same administrator PC, choose a different LAN card
by using the "Select Adapter" tool.
3. Press the "Refresh" button for the currently-connected devices in the discovery list as the screen shows below:
1. This utility shows all necessary information from the devices, such as MAC address, device name, firmware version and
Device IP subnet address. It can also assign a new password, IP subnet address and description to the devices.
2. After the setup is completed, press the "Update Device", "Update Multi" or "Update All" button to take effect. The
definitions of the above 3 buttons are shown below:

Update Device: use current setting on one single device.
Figure 3-1-6: Planet Smart Discovery Utility Screen
Figure 3-1-7: Planet Smart Discovery Utility Screen
31
User's Manual of IGS-801M