The page includes the following fields:
Object
Interface
Total (Bytes)
Left to Send (Bytes)
Status
Mandatory TLVs
MED Capabilities
MED Location
MED Network Policy
MED Extended Power
via MDI
802.3 TLVs
Optional TLVs
MED Inventory
802.1 TLVs
Figure 4-12-16 LLDP Port Overloading Table Page Screenshot
Description
The switch port number of the logical port
Total number of bytes of LLDP information that is normally sent in a packet
Total number of available bytes that can also send LLDP information in a packet
Gives the status of the TLVs
Displays if the mandatory group of TLVs were transmitted or overloaded
Displays if the capabilities packets were transmitted or overloaded
Displays if the location packets were transmitted or overloaded
Displays if the network policies packets were transmitted or overloaded
Displays if the extended power via MDI packets were transmitted or overloaded
Displays if the 802.3 TLVs were transmitted or overloaded
If the LLDP MED extended power via MDI packets were sent, or if they were
overloaded
Displays if the mandatory group of TLVs was transmitted or overloaded
Displays if the 802.1 TLVs were transmitted or overloaded
296
User's Manual of IGS-801M