The page includes the following fields:
Object
ACL Name
Sequence
Action
Protocol
Source IP Address
Source IP Address
Value
Source IP Wildcard
Mask
Destination IP Address
Destination IP Address
Value
Destination IP
Wildcard Mask
Source Port
Description
Select ACL name from this drop-down list.
Set the ACL sequence.
Indicates the forwarding action of the ACE.
Permit: Frames matching the ACE may be forwarded and learned.
Deny: Frames matching the ACE are dropped.
Shutdown: Port shutdown is disabled for the ACE..
Specify the protocol filter for this ACE.
Any (IP): No protocol filter is specified.
Select from list: If you want to filter a specific protocol with this ACE, choose
this value and select protocol from this drop-down list.
Protocol ID to match: If you want to filter a specific protocol with this ACE,
choose this value and set current protocol ID.
Specify the Source IP address filter for this ACE.
Any: No source IP address filter is specified.
User Defined: If you want to filter a specific source IP address with this ACE,
choose this value. A field for entering a source IP address value appears.
When "User Defined" is selected for the source IP address filter, you can enter a
specific source IP address. The legal format is "xxx.xxx.xxx.xxx". A frame that
hits this ACE matches this source IP address value.
When "User Defined" is selected for the source IP filter, you can enter a specific
SIP mask in dotted decimal notation.
Specify the Destination IP address filter for this ACE.
Any: No destination IP address filter is specified.
User Defined: If you want to filter a specific destination IP address with this
ACE, choose this value. A field for entering a source IP address value
appears.
When "User Defined" is selected for the destination IP address filter, you can
enter a specific destination IP address. The legal format is "xxx.xxx.xxx.xxx". A
frame that hits this ACE matches this destination IP address value.
When "User Defined" is selected for the destination IP filter, you can enter a
specific DIP mask in dotted decimal notation.
Specify the source port for this ACE.
Any: No specifc source port is specified (source port status is "don't-care").
Single: If you want to filter a specific source port with this ACE, you can
enter a specific source port value. A field for entering a source port value
appears. The allowed range is 0 to 65535. A frame that hits this ACE
263
User's Manual of IGS-801M