Multicast Throttling Setting - Planet Networking & Communication igs-801m User Manual

4.7.6 Multicast Throttling Setting

Multicast throttling sets a maximum number of multicast groups that a port can join at the same time. When the maximum
number of groups is reached on a port, the switch can take one of two actions; either "deny" or "replace". If the action is set to
deny, any new multicast join reports will be dropped. If the action is set to replace, the switch randomly removes an existing
group and replaces it with the new multicast group.
Once you have configured multicast profiles, you can assign them to interfaces on the Industrial Managed Switch. Also you can
set the multicast throttling number to limit the number of multicast groups an interface can join at the same time. The Max Group
and Information screens in
The page includes the following fields:
Object

IP Type
 Port Select
 Max Groups
 Action
Buttons
: Click to apply changes.
Figure 4-7-34 & Figure 4-7-35
Figure 4-7-34 Max Groups and Action Setting Page Screenshot
Description
Select IPv4 or IPv6 from this drop-down list
Select port number from this drop-down list
Sets the maximum number of multicast groups an interface can join at the same
time.
Range: 0-256;
Default: 256
Sets the action to take when the maximum number of multicast groups for the
interface has been exceeded.
(Default: Deny)
-Deny - The new multicast group join report is dropped
-Replace - The new multicast group replaces an existing group
appear.
171
User's Manual of IGS-801M