Symptom
Spots or lines appear at regular
intervals on the prints.
Probable Causes
One or more of the
components in the paper path
is marking the paper.
Xerox
Solutions
1. Print the Repeating Defects pages.
At the control panel, touch Device >
Support > Support Pages > Repeating
Defects.
2. To determine the cause, measure the
distance between the print defects.
• 28 mm (1.1 in.) - Drum Cartridge
• 53 mm (2.1 in.) - Drum Cartridge
• 75 mm (3.0 in.) - Drum Cartridge
• 82 mm (3.2 in.) - Fuser
• 95 mm (3.7 in.) - Fuser
• 25 mm (1.0 in.) - Transfer Belt
• 48 mm (1.9 in.) - Transfer Belt
• 57 mm (2.2 in.) - Transfer Belt
• 57 mm (2.2 in.) - Transfer Roller
3. If the repeating defects match one of
these distances, replace that item.
4. If the distance matches the Transfer Belt
or Transfer Roller, call for service or
replace the Maintenance Kit.
VersaLink
C405 Color Multifunction Printer
®
®
Troubleshooting
211
User Guide