2. Tip the filter holder to drain any fluid into an approved container.
Filter Installation
1. Position filter holder onto bracket and secure filter holder in place.
2. Lubricate the sealing ring on the filter with oil.
3. Install the filter and tighten securely by hand.
IMPORTANT: Visually inspect for fuel leakage from the filter while turning the
ignition key to the "RUN" position, forcing fuel into the filter.
Corrosion Control Anode
The outboard has corrosion control anodes at different locations. An anode
helps protect the outboard against galvanic corrosion by sacrificing its metal to
be slowly eroded instead of the outboard metals.
MAINTENANCE
74
13468
14764
eng