Connecting Speakers - Inter-m DPA-5075M i Operation Manual

DIGIT L MULTI MPLIFIER

Connecting Speakers

Connecting Speakers
- Installation of Speaker
When you connect the speaker, after separating the power code from the socket, connect the speakers
according to speaker type and connecting method to the rear panel.
Installation of High Impedance Speaker
- If High Impedance speaker is connected to each zone in parallel, up to 75W of speaker output for
each channel can be used.
10W
※ C UTION : 1. Do not excess total 75W for speakers connected in each channel.
2. Do not connect the speaker with low impedance, such as 4Ω, 8Ω.
It may cause the failure of device.
3. Do not put speaker output cables together with signal input cables.
12
DP -5075M
....
10W 10W
133.3Ω 133.3Ω 133.3Ω 133.3Ω
(100V) (100V) (100V) (100V)
4 3 2 1
10W