Connecting Speakers - Inter-m M-106A Operation Manual

PUBLIC DDRESS MPLIFIER

Connecting Speakers

Connecting Speakers
Before connecting speakers to M -106 unit, be sure to disconnect the C power cable.
- FOR 4 TERMIN L
- FOR 70V TERMIN L
*3
NOTE : 1. Make certain that the total impedance is not less than the rated impedance indicated.
2. Don't have to use several speaker terminals at the same time.
3. If you're just dealing with the high impedance terminal, then make sure that 4
connected with OPT-IN terminal.
8
M -106
4Ω
8Ω
SPEAKER
(ONE 4 SPE KER) (TWO 8
- FOR 100V TERMIN L
8Ω
SPE KERS)
*3
output terminal is