Connecting Speakers - Inter-m MA-106N Operation Manual

Connecting Speakers

Connecting Speakers
Before connecting speakers to M -106N unit, be sure to disconnect the C power cable.
- FOR 4 TERMIN L
- FOR 70V TERMIN L
*3
NOTE : 1. Make certain that the total impedance is not less than the rated impedance indicated.
2. Don't have to use several speaker terminals at the same time.
3. If you're just dealing with the high impedance terminal, then make sure that 4
connected with OPT-IN terminal.
4Ω
8Ω
SPEAKER
(ONE 4 SPE KER) (TWO 8
- FOR 100V TERMIN L
PUBLIC DDRESS MPLIFIER
8Ω
SPE KERS)
*3
M -106N
output terminal is
7