Connecting Speakers - Inter-m MA-110N Operation Manual

DIGIT L MPLIFIER

※ Connecting Speakers

Before connecting speakers to M -110N unit, be sure to disconnect the C power cable.
- FOR 70V TERMIN L
6.9Ω 49Ω
25V 70V
※ Make sure that 4
OPT-IN terminal.
- FOR 4 TERMIN L
NOTE : 1. Make certain that the total impedance is not less than the rated impedance indicated.
2. Please make sure not to use 4 , 25V, 70V terminals simultaneously.
3. If you're just dealing with the high impedance terminal, then make sure that 4
connected with OPT-IN terminal.
8
M -110N
49Ω
output terminal is connected with
6.9Ω 49Ω
25V 70V
4Ω
or
SPEAKER
(ONE 4 SPE KER)
※ Please make sure not to use 4 , 25V, 70V terminals simultaneously.
- FOR 25V TERMIN L
6.9Ω 49Ω
25V 70V
6.9Ω
※ Make sure that 4
output terminal is connected with
OPT-IN terminal.
8Ω 8Ω
(TWO 8 SPE KERS)
output terminal is