6
Attach the lens hood.
Align the cutouts, and then turn clockwise.
M
emo
The hood must be turned until it contacts the bayonet mount
socket.
7
Press any key.
After several dozen seconds, "PLEASE OPEN LASER BARRIER AND PRESS ANY KEY" will be
displayed on the viewfinder.
8
Press any key.
The viewfinder displays the monitor screen, and the digitizer is ready for use.
N
ote
Place a lens cap on the lens you removed, put it in its case, and store in a safe place.
9
Use the field calibration system and the Polygon Editing Tool software to calibrate the
system.
R
For the field calibration procedure, refer to "Field Calibration" on the next page.
ef.
Replacing the Lens and Field Calibration
31