A0003 - Kyocera FS-C5015N Service Manual

2HJ/2HK
Code
7002
7003
7004
7401
1-4-16
Downloaded from www.Manualslib.com
Contents
Toner motor 2 overcurrent detection
error (cyan toner)
The engine controller PWB (A0004)
detected the overcurrent of toner motor
2.
Toner motor 1 overcurrent detection
error (magenta toner)
The engine controller PWB (A0004)
detected the overcurrent of toner motor
1.
Toner motor 3 overcurrent detection
error (yellow toner)
The engine controller PWB (A0004)
detected the overcurrent of toner motor
3.
Black developer unit non- installing
error
The toner sensor 4 inside the black
developer unit did not output the density
detection signal, judged the engine con-
troller PWB (A0004) the black developer
unit is not installed.
manuals search engine
Remarks
Causes Check procedures/corrective measures
Defective toner Replace the toner motor 2. See page 1-5-
motor 2. 50.
Defective engine Replace the engine controller PWB (A0004).
controller PWB See page 1-5-41.
(A0004).
Lump of toner Replace the cyan toner container.
inside cyan toner
container or defec-
tiveness of toner
replenishment drive
system.
Defective toner Replace the toner motor 1. See page 1-5-
motor 1. 50.
Defective engine Replace the engine controller PWB (A0004).
controller PWB See page 1-5-41.
(A0004).
Lump of toner Replace the magenta toner container.
inside magenta
toner container or
defectiveness of
toner replenish-
ment drive system.
Defective toner Replace the toner motor 3. See page 1-5-
motor 3. 50.
Defective engine Replace the engine controller PWB (A0004).
controller PWB See page 1-5-41.
(A0004).
Lump of toner Replace the yellow toner container.
inside yellow toner
container or defec-
tiveness of toner
replenishment drive
system.
Defective harness Check the damage of harness of the toner
of the toner sensor sensor 4, check the connection of the con-
4, defective con- nector with the black developer unit and the
nection of the con- printer main unit, if there is trouble, remedy
nector between or replace.
black developer unit
and the printer main
unit or poor contact
of the connector ter-
minals.
Defective toner Replace the black developer unit. See page
sensor 4. 1-5-12.
Defective engine Replace the engine controller PWB (A0004).
controller PWB See page 1-5-41.
(A0004).
Defective engine Replace the engine relay PWB (A0009).
relay PWB (A0009).