Jeep CHEROKEE 2017 Owner's Manual page 87

Hide thumbs Also See for CHEROKEE 2017:

Table of Contents

SYNC Button — If Equipped

Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indica-

tor is illuminated when this feature is enabled. SYNC is used to synchronize the passenger tem-

perature setting with the driver temperature setting. Changing the passenger's temperature set-

ting while in SYNC will automatically exit this feature.

Faceplate Knob

Blower Control

Blower Control is used to regulate the amount of air forced through the climate system. There

are seven blower speeds available. Adjusting the blower will cause automatic mode to switch to

manual operation. The speeds can be selected using either the blower control knob on the face-

plate or the buttons on the touchscreen.

• Faceplate: The blower speed increases as you turn the blower control knob clockwise from

the lowest blower setting. The blower speed decreases as you turn the blower control knob

counterclockwise.

• Touchscreen: Use the small blower icon to reduce the blower setting and the large blower

icon to increase the blower setting. Blower can also be selected by pressing the blower bar

area between the icons.

GETTING TO KNOW YOUR VEHICLE 85

Chapters

Table of Contents