To Manually Turn On The Stop/Start System; System Malfunction; Speed Control - If Equipped - Jeep CHEROKEE 2017 Owner's Manual

To Manually Turn On The Stop/Start System

Push the STOP/START Off switch (located on the switch
bank). The light on the switch will turn off.

System Malfunction

If there is a malfunction in the STOP/START system, the
system will not shut down the engine. A "SERVICE STOP/
START SYSTEM" message will appear in the instrument
cluster display. Refer to "Instrument Cluster Display" in
"Getting To Know Your Instrument Panel" for further
information.
If the "SERVICE STOP/START SYSTEM" message appears
in the instrument cluster display, have the system checked
by your authorized dealer.
SPEED CONTROL — IF EQUIPPED
When engaged, the Speed Control takes over accelerator
operations at speeds greater than 25 mph (40 km/h).
The Speed Control buttons are located on the right side of
the steering wheel.
Speed Control Buttons
1 — On/Off
2 — SET+/Accel
3 — RES/Resume
4 — SET-/Decel
5 — CANC/Cancel
NOTE: In order to ensure proper operation, the Speed
Control System has been designed to shut down if multiple
speed control functions are operated at the same time. If
this occurs, the Speed Control System can be reactivated by
pushing the Speed Control on/off button and resetting the
desired vehicle set speed.
STARTING AND OPERATING 283
6