Jeep Cherokee 2009 Operating Information Manual
  1. Manuals
  2. Brands
  3. Jeep Manuals
  4. Automobile
  5. Cherokee 2009
  6. Operating information manual

Jeep Cherokee 2009 Operating Information Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Jeep Cherokee 2009

Summary of Contents for Jeep Cherokee 2009

  • Page 2 OWNER REGISTRATION CERTIFICATE Selling Dealer OWNER: Stamp ADDRESS: Selling Dealer Signature Telephone Number: Private Make Business I have provided and explained the following: Model OPERATING MANUAL (Vehicle Handbook) Month Year VEHICLE DATE OF REG: PRE DELIVERY INSPECTION CUSTOMER Registration No. SIGNATURE: or License No.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS ..............3 INTRODUCTION .

  • Page 6: Introduction

    INTRODUCTION • INTRODUCTION ......4 • ROLLOVER WARNING ..... . . 4 •...

  • Page 7: Introduction

    INTRODUCTION To keep your vehicle running at it’s best, have your safely may result in an accident, rollover of the vehicle serviced at recommended intervals by an vehicle, and severe or fatal injury. Drive carefully. Thank you for selecting one of our models. Be authorized dealer who has the qualified person- assured that it represents precision workmanship, nel, special tools and equipment to perform all...

  • Page 8: How To Use This Manual

    nance of your new vehicle. It is supplemented by In view of the many replacement parts and acces- warranties cover the costs of repairing damage or a Warranty Information Booklet and various cus- sories from various manufacturers available on conditions caused by any changes to your car tomer oriented documents.

  • Page 10: Warnings And Cautions

    WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/ This Owners Manual contains WARNINGS The Vehicle Identification Number (VIN) is found ALTERATIONS against operating procedures that could result in on the left front corner of the instrument panel. The an accident or bodily injury. It also contains CAU- VIN is visible from outside of the vehicle through WARNING! TIONS against procedures that could result in...

  • Page 12: Things To Know Before Starting Your Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • A WORD ABOUT YOUR KEYS ....12 • Ignition Key Removal ..... 12 •...
  • Page 13 • To Unlatch the Liftgate Flip-Up Window ..17 • Programming Additional RKE Transmitters ..17 • Battery Replacement ..... 17 •...
  • Page 14 • Child Restraint ......34 • ENGINE BREAK-IN RECOMMENDATIONS ... 40 •...

  • Page 16: Sentry Key

    Replacement Keys NOTE: the bulb check, it indicates that someone used an invalid key to start the engine. Either of these The Key-In-Ignition reminder only sounds NOTE: conditions will result in the engine being shut off when the ignition key is placed in the LOCK or Only keys that have been programmed to the after two seconds.

  • Page 17: General Information

    General Information To Arm the System: • When the system is armed, the interior power door lock switches will not unlock the Operation is subject to the following conditions: 1. Remove the key from the ignition switch and doors. • This device may not cause harmful interfer- exit the vehicle.

  • Page 18: To Set The Alarm

    To set the alarm: Security System Manual Override To disable the intrusion sensor, activate the LOCK request three times using the RKE transmitter The Security Alarm will not arm if you lock the 1. Remove the key from the ignition switch and during the pre-arming period (lamp flashing doors using the manual door lock plunger.

  • Page 19: Remote Keyless Entry (Rke)

    REMOTE KEYLESS ENTRY (RKE) To Unlock the Doors and Liftgate: 3. Test the feature from outside the vehicle by pressing the LOCK and UNLOCK buttons on the This system allows you to lock or unlock the doors Press and release the UNLOCK button on the RKE RKE transmitter.

  • Page 20: To Unlatch The Liftgate Flip-Up Window

    1. Remove the screw from the RKE transmitter Flash Lights with Lock NOTE: The feature will cause the turn signal lights to flash case (if equipped). Pressing the LOCK button on the RKE trans- when the doors are locked or unlocked with the mitter while you are inside the vehicle will 2.

  • Page 21: General Information

    General Information • Ignition key removed from ignition switch. RKE transmitters and receivers operate on a car- • Battery at an acceptable charge level. rier frequency of 433.92 MHz as required by EEC • RKE PANIC button not pressed. regulations. These devices must be certified to conform to specific regulations in each individual To Enter Remote Start Mode country.

  • Page 22: Door Locks

    DOOR LOCKS To Exit Remote Start Mode and Drive the WARNING! Vehicle Manual Door Locks Before the end of the 15-minute cycle, press and • For personal security and safety in the event To lock each door, push the door lock plunger on release the UNLOCK button on the RKE transmit- of an accident, lock the vehicle doors as you each door trim panel downward.

  • Page 23: Power Door Locks

    Power Door Locks Automatic Door Locks 2. Cycle the ignition switch between LOCK and The doors will lock automatically on vehicles with ON and then back to LOCK four times, ending up A power door lock switch is located on each of the power door locks if all of the following conditions in the LOCK position.

  • Page 24: Child-Protection Door Lock System (Rear Doors)

    Child-Protection Door Lock System Automatic Unlock Doors on Exit NOTE: Programming (Rear Doors) When the child lock system is engaged, the The Automatic Unlock Doors On Exit feature can To provide a safer environment for small children door can be opened only by using the outside be enabled or disabled as follows: riding in the rear seats, the rear doors are door handle even though the inside door lock...

  • Page 25: Windows

    2. Insert the tip of the ignition key into the child Auto Down Feature lock control and rotate it to the UNLOCK position. The driver power window switch has an Auto Down feature. Press the window switch past the first detent, release, and the window will go down automatically.
  • Page 26 Auto Up Feature with Anti-Pinch NOTE: Protection — If Equipped • If the window runs into any obstacle during On some models, the driver’s power window auto-closure, it will reverse direction and switch has an Auto Up feature. Pull the window then stop.

  • Page 27: Wind Buffeting

    Wind Buffeting Please pay close attention to the information in NOTE: this section. It tells you how to use your restraint Wind buffeting can be described as the percep- Use the power door LOCK switch on either system properly to keep you and your passengers tion of pressure on the ears or a helicopter-type front door trim panel or the Remote Keyless as safe as possible.

  • Page 28: Lap/Shoulder Belts

    Lap/Shoulder Belts Lap/Shoulder Belt Operating Instructions WARNING! All seating positions in your vehicle have combi- 1. Enter the vehicle and close the door. Sit back • It is extremely dangerous to ride in a cargo nation lap/shoulder belts. The belt webbing re- and adjust the seat.
  • Page 29 3. When the belt is long enough to fit, insert the 4. Position the lap belt across your thighs, below WARNING! latch plate into the buckle until you hear a “click.” your abdomen. To remove slack in the lap belt portion, pull up a bit on the shoulder belt.

  • Page 30: Lap/Shoulder Belt Untwisting Procedure

    1. Position the latch plate as close as possible to Adjustable Upper Shoulder Belt Anchorage In the front seating positions, the shoulder belt the anchor point. can be adjusted upward or downward to position 2. At about 6 to 12 in (15 to 30 cm) above the the belt away from your neck.

  • Page 31: Automatic Locking Mode — If Equipped

    collision that is severe enough to deploy the If the Enhanced Warning System (BeltAlert ) to disengage the automatic locking mode and airbags and pretensioners, both must be replaced. activate the vehicle sensitive (emergency) locking is deactivated, the Seat Belt Warning Light will mode.

  • Page 32: Seat Belts And Pregnant Women

    Seat Belts and Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible.
  • Page 33 Along with the seat belts, the front airbags provide Children that are not big enough to wear the WARNING! improved protection for the driver and front pas- vehicle seat belt properly should be secured in senger. Side Curtain Airbags also work with seat the rear seat in child restraints or belt-positioning •...
  • Page 34 • Side Remote Acceleration Sensors check, the “Airbag Warning Light” will turn off. If WARNING! the ORC detects a malfunction in any part of the • Steering Wheel and Column system, it turns on the “Airbag Warning Light” • Relying on the airbags alone could lead to •...
  • Page 35 that it takes to blink your eyes. The bags then The following requirement must be strictly ad- If you do have a collision, which deploys the quickly deflate while helping to restrain the hered to: airbags, any or all of the following may occur: driver and front passenger.
  • Page 36 Maintaining Your Airbag System Airbag Warning Light WARNING! You will want to have the airbag system ready to inflate for your protection in an impact. The airbag Deployed airbags and seat belt pretensioners WARNING! system is designed to be maintenance free. If any cannot protect you in another collision.

  • Page 37: Child Restraint

    In conjunction with other data gathered during a confidentially. Confidential data will not be disclosed • Engine control status (including engine speed) complete accident investigation, the electronic by Chrysler Corporation to any third party except • Transmission gear selection data may be used by Chrysler Corporation and when: others to learn more about the possible causes of •...
  • Page 38 Children 12 years and under should ride properly There are different sizes and types of restraints for buckled up in a rear seat, if available. According children from newborn size to the child almost to crash statistics, children are safer when prop- large enough for an adult safety belt.
  • Page 39 Infants And Small Children The belt-positioning booster seat is for children WARNING! weighing more than 40 lbs (18 kg), but who are • Safety experts recommend that children ride still too small to fit the vehicle’s seat belts properly. • Improper installation can lead to failure of an rearward-facing in the vehicle until they are at If the child cannot sit with knees bent over the infant or child restraint.
  • Page 40 Here are some tips on getting the most out of LATCH — Child Seat Anchorage System The two outboard rear-seating positions have your child restraint: (Lower Anchors and Tether for CHildren) lower anchorages that are capable of accommo- Your vehicle’s rear seat is equipped with the child dating LATCH-compatible child seats having flex- •...
  • Page 41 Installing the LATCH-Compatible Child In addition, there are tether strap anchorages or connectors over the top of the anchorage bars, Restraint System behind each rear seating position located on the pushing aside the seat cover material. Then, We urge that you carefully follow the directions of back of the seat.
  • Page 42 portion of the lap/shoulder belt will tighten the belt. To attach a child restraint tether strap: WARNING! However, any seat belt system may loosen with Route the tether strap under the headrest and time, so check the belt occasionally, and pull it Child Restraint Anchorages are designed to with- attach the hook to the tether anchor located on the tight if necessary.

  • Page 43: Engine Break-In Recommendations

    ENGINE BREAK-IN SAFETY TIPS Exhaust Gas RECOMMENDATIONS Transporting Passengers A long break-in period is not required for the WARNING! NEVER TRANSPORT PASSENGERS IN THE engine in your vehicle. CARGO AREA. • Exhaust gases can injure or kill. They contain Drive moderately during the first 300 mi (500 km). carbon monoxide (CO), which is colorless and After the initial 60 mi (100 km), speeds up to 50 or WARNING!

  • Page 44: Safety Checks You Should Make Inside The Vehicle

    competent mechanic inspect the complete ex- Airbag Warning Light Lights haust system and adjacent body areas for broken, The light should come on and remain on for six to Have someone observe the operation of exterior damaged, deteriorated, or mispositioned parts. eight seconds as a bulb check when the ignition lights while you work the controls.

  • Page 46: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE • MIRRORS ......48 • Inside Day/Night Mirror ....48 •...
  • Page 47 • Head Restraints ......65 • Heated Seats — If Equipped ....65 •...
  • Page 48 • Mist Feature ......74 • Headlights with Wipers (Available with Auto Headlights Only) ... 74 •...
  • Page 49 • Pinch Protect Feature ....81 • Pinch Protect Override ....81 •...
  • Page 50 • Rear Window Defroster — If Equipped ..89 • ROOF LUGGAGE RACK — IF EQUIPPED ... 90...

  • Page 52: Heated Remote Control Mirrors - If Equipped

    (RKE) transmitter or the memory switch on the Sun Visor “Slide-On Rod” Feature — If instrument panel to return the power mirrors to Equipped pre-programmed positions. Refer to “Driver The sun visor “slide-on rod” feature allows for Memory Seat” in this section for details. additional flexibility in positioning the visor to block out the sun.

  • Page 53: Operation

    Voice commands can be used to operate the • www.dodge.com/uconnect mirror has the two control buttons that UConnect system and to navigate through the • www.jeep.com/uconnect will enable you to access the system. UConnect menu structure. Voice commands are UConnect allows you to transfer calls between Voice Recognition Button required after most UConnect system prompts.
  • Page 54 when you talk in a normal conversational tone, To complete the pairing process, you will need to cellular phone can be in use, connected to your as if speaking to someone sitting a few feet/ reference your cellular phone owner’s manual. UConnect system.
  • Page 55 • The system will prompt you to say the name of This will allow you to store multiple numbers for NOTE: the person you want to call. each phonebook entry, if desired. • The phone handset must support Bluetooth OBEX transfers of phonebook •...

  • Page 56: Phone Call Features

    • Next, choose the number designation (home, of the entries in the phonebook from which you • After the Ready prompt and the following work, mobile, or pager) that you wish to edit. choose. To select one of the entries from the list, beep, say Phonebook List Names.
  • Page 57 accept the call. To reject the call, press and hold Place/Retrieve a Call From Hold Call Termination the “Phone” button until you hear a single beep To put a call on hold, press the “Phone” button To end a call in progress, momentarily press the indicating that the incoming call was rejected.

  • Page 58: Uconnect System Features

    until the call ends, or until the vehicle battery NOTE: reachable and the UConnect system is opera- condition dictates cessation of the call on the tional, you may reach the emergency number as After every UConnect language change op- UConnect system and transfer of the call to follows: eration, only the language-specific 32-name the mobile phone.
  • Page 59 NOTE: pad, you can press the “Voice Recognition” but- Barge In - Overriding Prompts ton and say the sequence you wish to enter The “Voice Recognition” button can be used when The Breakdown service number has to be followed by the word Send. For example, if you wish to skip part of a prompt and issue your setup before using.

  • Page 60: Advanced Phone Connectivity

    Dialing Using the Cellular Phone Keypad In order to un-mute the UConnect system: • After the “Ready” prompt and the following You can dial a phone number with your cellular beep, say “Setup Phone Pairing.” • Press the “Voice Recognition” button. phone keypad and still use the UConnect system •...

  • Page 61: Things You Should Know About Your Uconnect System

    Delete UConnect Paired Cellular Phones • Press the “Voice Recognition” button and say • low-to-medium vehicle speed, the Setup, Voice Training command. • Press the “Phone” button to begin. • low road noise, Repeat the words and phrases when prompted by •...
  • Page 62 • In a convertible vehicle, system performance • operation from the driver seat. pens, the connection can generally be re- may be compromised with the convertible top established by switching the phone off/on. Your • Performance, such as audio clarity, echo, and down.
  • Page 66 Voice Commands Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) Primary Alternate(s) zero English set up phone settings or phone set up delete all erase all transfer call Espanol UConnect Tutorial three Francais try again four German Deutsch voice training system training five help...

  • Page 67: Seats

    SEATS WARNING! WARNING! Manual Front Seat Adjustments Adjusting a seat while the vehicle is moving is • Adjusting a seat while the vehicle is moving is Forward and Rearward Adjustment — If dangerous. The sudden movement of the seat dangerous. The sudden movement of the seat Equipped could cause you to lose control.

  • Page 68: Power Seat - If Equipped

    Head Restraints Head restraints can reduce the risk of whiplash injury in the event of impact from the rear. Adjust the head restraints so that the upper edge is as high as practical. The head restraints have a locking button that must be pushed inward to lower the head restraint.

  • Page 69: 60/40 Split Folding Rear Seat With Fold Flat Feature

    The controls for each heater are located near the system will automatically switch to low-level heat- NOTE: bottom center of the instrument panel. After turn- ing after 30 minutes of continuous operation. At Prior to folding the rear seat, it may be neces- ing the ignition ON, you can choose from HIGH, that time, the number of indicator lights changes sary to position the front seat to its mid-track...

  • Page 70: Driver Memory Seat - If Equipped

    memory switch. Each memory profile contains WARNING! desired position settings for the driver seat and side mirrors, and a set of desired radio station Be certain that the seatback is securely locked presets. into position. If the seatback in not securely locked into position the seat will not provide the The memory switch is located on the instrument proper stability for child seats and/or passen-...

  • Page 71: Linking And Unlinking The Remote Keyless Entry (Rke) Transmitter To The Memory Feature

    Linking and Unlinking the Remote Memory Position Recall If desired, a second memory profile can be stored into memory as follows: Keyless Entry (RKE) Transmitter to the NOTE: Memory Feature 1. Turn the ignition ON. • For vehicles equipped with an automatic Your RKE transmitters can be programmed to transmission, the vehicle must be in PARK 2.

  • Page 72: Easy Entry/Exit Seat (Available With Memory Seat Only)

    Easy Entry/Exit Seat (Available with Each stored memory setting will have an associ- center when facing hood). Push the safety latch ated Easy Entry and Easy Exit position. lever to the right and then raise the hood. Memory Seat Only) This feature provides automatic driver seat posi- NOTE: tioning to enhance driver mobility when entering...

  • Page 73: Lights

    Headlights and Parking Lights To prevent possible damage: NOTE: Turn the end of the Multifunction Control Lever to The engine must be running before the head- • Before closing hood, make sure the hood prop the first detent for parking light operation. Turn the lights will turn on in the Automatic mode.

  • Page 74: Lights-On Reminder

    The delay interval begins when you turn off the Fog Lights — If Equipped Turn Signals headlights. Only the headlights will illuminate dur- To activate the front fog lights, turn on the Move the Multifunction Control Lever upward or ing this time. parking lights or the low beam headlights downward and the corresponding turn signal in- and pull out on the end of the Multifunc-...

  • Page 75: Highbeam/Lowbeam Select Switch

    Highbeam/Lowbeam Select Switch occurs, wait 30 seconds before activating the Dimmer Control Flash-to-Pass function again. The Dimmer Control is part of the Multifunction Push the Multifunction Control Lever away from Control Lever. It controls the operation of the you to switch the headlights to HIGH beam. Pull Interior Lights interior lights and the brightness of the instrument the Multifunction Control Lever toward you, to...

  • Page 76: Windshield Wipers And Washers

    Interior Light ON Rotate the end of the lever to the first detent past CAUTION! Rotate the Dimmer Control completely upward to the intermittent settings for low-speed wiper op- the second detent to turn on the interior lights. The eration, or to the second detent past the intermit- •...

  • Page 77: Mist Feature

    are five delay settings, which allow you to regulate Rain Sensing Wipers — If Equipped the wipe interval from a minimum of two cycles This feature senses moisture on the windshield every second to a maximum of approximately 36 and automatically activates the wipers for the seconds between cycles or from a minimum of driver.

  • Page 78: Windshield Washers

    • The rain-sensing feature can be turned on return to normal operation once remote start solvent (not radiator antifreeze) and operate the and off through the Electronic Vehicle Infor- mode is exited. Refer to “Remote Start System” system for a few seconds to flush out the residual mation Center (EVIC) —...

  • Page 79: Electronic Speed Control - If Equipped

    To unlock the steering column, push the control neously (i.e., Set and Cancel). If this occurs, handle downward. To tilt the steering column, push and release the ON/OFF button to move the steering wheel upward or downward as reactivate the system and then reestablish desired.

  • Page 80: To Resume Speed

    or clutch pressure while slowing the vehicle will is tapped, speed increases so that tapping the WARNING! deactivate the speed control without erasing the lever three times will increase speed by 3 mph (5 set speed from memory. Pressing the ON/OFF km/h), etc.

  • Page 81: Rear Park Assist Sensors

    Rear Park Assist Sensors Rear Park Assist Warning Display When the ignition is changed to the RUN/ON position, the warning display will turn ON all of its The four Rear Park Assist Sensors, located in the The Rear Park Assist Warning Display, located in the LEDs for about one second.

  • Page 82: Enable/Disable The Rear Park Assist System

    System Usage Precautions NOTE: ment cluster will actuate a single chime, once per ignition cycle, and it will display the message. The Rear Park Assist system will MUTE the NOTE: radio, if on, when the system is sounding an The Rear Park Assist Switch LED will be ON when •...

  • Page 83: Power Sunroof - If Equipped

    POWER SUNROOF — IF EQUIPPED CAUTION! WARNING! The power sunroof switch is located between the • The Rear Park Assist System is only a parking • Drivers must be careful when backing up even sun visors on the overhead console. aid and it is unable to recognize every ob- when using the Rear Park Assist System.

  • Page 84: Opening Sunroof - Express

    Closing Sunroof - Express Sunshade Operation WARNING! Press the switch forward and release, and the The sunshade can be opened manually. However, • Never leave unattended children in a vehicle sunroof will close automatically from any position. the sunshade will open automatically as the sun- The sunroof will close fully and stop automatically.
  • Page 85 the ignition switch is turned to the LOCK position. CAUTION! WARNING! Opening either front door will cancel this feature. • In an accident, there is a greater risk of being • Never attempt to open or close the Sky For vehicles equipped with the EVIC, the power thrown from a vehicle with the Sky Slider open.
  • Page 86 Power Top Control Press the switch forward and release it within For either operation, the Sky Slider will open fully one-half second and the Sky Slider will open and stop automatically unless you interrupt the The Power Top switch is located between the sun from the rear and move automatically toward the operation by releasing the switch.
  • Page 87 Wind Buffeting Manually The Sky Slider drive motors are mounted to the Wind buffeting can be described as the percep- roof above the cargo lamp. In the event that your tion of pressure on the ears or a helicopter-type vehicle losses battery power, you can close the sound in the ears.
  • Page 88 Electrical Outlet Use With Engine Off CUPHOLDERS STORAGE Front and rear cupholders are located in the Front Storage Compartment center console. CAUTION! The front storage compartment (located on the left side of the instrument panel) can hold cell • Many accessories that can be plugged in phones, PDAs, and other small items.
  • Page 89 Console Storage Compartment Accessing the Storage Bin To open, press the latch and lift the cover. NOTE: The spring-loaded latches that retain the stor- age bin cover to the cargo load floor should not be used as cargo tie-downs. 1. Flip the spring-loaded latch pull-loops up. Removable Storage Tray CARGO AREA FEATURES Center Console...
  • Page 90 NOTE: WARNING! You can install the cover with either side facing • Cargo tie-downs are not safe anchors for a upward. child seat tether strap. In a sudden stop or 5. With the cover seated in the floor, pull upward collision, a tie-down could pull loose and allow on loops and twist them one-quarter turn so that the child seat to come loose.
  • Page 91 • Do not pile luggage or cargo higher than the The cover rolls away neatly inside its housing ends of the cover) into the notches in the trim top of the seatback. This could impair visibility when not in use. You can also remove the cover panels.
  • Page 92 REAR WINDOW FEATURES NOTE: Adding Washer Fluid The windshield washer and rear window washer The rear wiper will automatically return to the Rear Window Wiper/Washer — If share the same fluid reservoir. The reservoir is park position if you turn OFF the ignition Equipped located in the front of the engine compartment.
  • Page 93 ROOF LUGGAGE RACK — IF CAUTION! CAUTION! EQUIPPED • Use care when washing the inside of the rear To avoid damage to the roof rack and vehicle, do NOTE: window. Do not use abrasive window cleaners not exceed the maximum roof rack load capacity. Roof rack and crossbars cannot be used with on the interior surface of the window.

  • Page 94: Instrument Panel And Controls

    INSTRUMENT PANEL AND CONTROLS • INSTRUMENT PANEL FEATURES ....93 • INSTRUMENT CLUSTER ..... 94 •...
  • Page 95 • REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED . . 113 • Right-Hand Switch Functions ....113 • Left-Hand Switch Functions for Radio Operation ..113 •...
  • Page 96 INSTRUMENT PANEL FEATURES 1 — Air Outlet 5 — Radio 9 — Lower Switch Bank 2 — Instrument Cluster 6 — Glove Box 10 — Storage Bin (if equipped) 3 — Storage Tray 7 — Climate Control 4 — Center Air Outlet 8 —...
  • Page 97 INSTRUMENT CLUSTER...
  • Page 98 INSTRUMENT CLUSTER inflation pressure label, you should determine the start-ups as long as the malfunction exists. When proper tire inflation pressure for those tires.) the malfunction indicator is illuminated, the sys- DESCRIPTIONS tem may not be able to detect or signal low tire As an added safety feature, your vehicle has been 1.
  • Page 99 5. Electronic Throttle Control (ETC) Warning Certain conditions such as a loose or missing gas 8. Front Fog Light Indicator Light — If Light — If Equipped cap, poor fuel quality, etc. may turn on the light Equipped This light informs you of a problem after engine start.
  • Page 100 12. Charging System Warning Light 14. Anti-Lock Brake Warning Light 16. 4 LOW Mode Indicator Light — If This light shows the status of the electri- This light monitors the Anti-Lock Equipped cal charging system. The light should Brake System (ABS). This light will This light alerts the driver that the turn on when the ignition switch is first turn on when the ignition switch is...
  • Page 101 19. 4WD Indicator Light — Vehicles Equipped NOTE: 22. Coolant Temperature Warning Light with Command-Trac This light warns of an overheated engine The “ESP/BAS Warning Lamp” comes on mo- This light alerts the driver that the condition. If the light turns on while driv- mentarily each time the ignition switch is vehicle is in the four-wheel drive ing, safely pull over and stop the vehicle.
  • Page 102 compass heading in the screen below the speed- WARNING! CAUTION! ometer. Refer to “Vacuum Fluorescent Display” for details A hot engine cooling system is dangerous. You Do not leave your vehicle unattended with the or others could be badly burned by steam or engine running, as you would not be able to react Resetting the Trip Odometer boiling coolant.
  • Page 103 cause of repair or replacement, be sure to keep Change Oil Message (Base & Mid Line NOTE: a record of the reading before and after the Clusters Only) If the indicator message illuminates when you service so that the correct mileage can be start the vehicle, the oil change indicator sys- Your vehicle is equipped with an engine oil determined.
  • Page 104 The dual brake system provides a reserve braking Vehicles equipped with Anti-Lock brakes (ABS), 32. Vehicle Security Alarm Indicator Light — capacity in the event of a failure to a portion of the are also equipped with Electronic Brake Force If Equipped hydraulic system.
  • Page 105 Setting Compass Variance (Mid Line Cluster NOTE: To set the variance, first, turn the ignition switch to Only) the ON position. Next, press and hold the Trip Magnetic materials should be kept away from Odometer button until the current variance zone the top of the right rear quarter window.
  • Page 106 Compass Variance Map...
  • Page 107 NOTE: 35. Rear Fog Light Indicator — If Equipped • Outside temperature display This light shows when the rear fog lights Zone 8 is the factory default. During program- • Trip computer functions are on. ming, the zone value will wrap around from •...
  • Page 108 Press the FUNCTION SELECT button • Memory System Disabled – Vehicle Not in Park • Right Front Low Pressure (with a single chime). to accept a selection. (with a single chime) — automatic transmission Refer to “Tire Pressure Monitoring System” in Section 5 of this manual.
  • Page 109 press and release the MENU button. To reset the • Average Fuel Economy • Elapsed Time oil change indicator system (after performing the Shows the average fuel economy since the last Shows the total elapsed time of travel since the scheduled maintenance) perform the following reset.
  • Page 110 Automatic Compass Calibration 1. Turn the ignition switch ON. Compass Variance This compass is self-calibrating, which eliminates Compass Variance is the difference between 2. Press the MENU button until the Personal Set- the need to set the compass manually. When the magnetic North and geographic North.
  • Page 111 Compass Variance Map...
  • Page 112 1. Turn the ignition switch ON. When the appropriate conditions exist, and if The EVIC displays this symbol to in- supported by the cell phone, the EVIC will display dicate that you have voice mail. 2. Press and hold the COMPASS button for ap- the following telephone symbols: proximately two seconds.
  • Page 113 The EVIC displays this symbol to in- NOTE: Remote Key Unlock dicate that the UConnect phone is When Driver Door 1st Press is selected, only the The EVIC will not change the UConnect lan- currently not available. driver’s door will unlock on the first press of the guage selection.
  • Page 114 make your selection, press and release the Sound Horn with Remote Key Lock Entry/Exit Seat” under “Driver Memory Seat” in When ON is selected, a short horn sound will Section 3 of this manual for more information. FUNCTION SELECT button until “0,” “30,” “60,” or occur when the RKE transmitter LOCK button is “90”...
  • Page 115 RADIO GENERAL INFORMATION AM Reception Confirmation of Voice Commands — If Equipped AM sound is based on wave amplitude, so AM Radio Broadcast Signals When ON is selected, all voice commands from reception can be disrupted by such things as The radio will provide excellent reception under the UConnect system are confirmed.
  • Page 117 ting is to a particular symbol, the more air distri- Temperature Control • Mix Use this control to regulate bution you receive from that mode. Air is directed through the floor, defrost, the temperature of the air and side window demist outlets. This set- •...
  • Page 118 dust, and to cool the interior rapidly upon initial • MAX A/C mounted between the sun-visors and from various start up in very hot or humid weather. For maximum cooling use the A/C and recircula- sensors located throughout the vehicle. tion buttons at the same time.
  • Page 119 Once the comfort level is selected, the system will NOTE: Manual Operation maintain that level automatically using the heating This system offers a full complement of manual • The temperature setting can be adjusted at system. Should the desired comfort level require override features, which consist of Blower Pre- any time without affecting automatic opera- air conditioning, the system will automatically...
  • Page 121 The operator can override the AUTO mode setting • Floor • Recirculation Control to change airflow distribution by rotating the Mode Air is directed through the floor outlets with The system will automatically control Control knob (on the right) to one of the following a small amount flowing through the defrost recirculation.
  • Page 122 per visibility. For this reason, the system will Summer Operation NOTE: not allow Recirculation to be selected while The engine cooling system in air-conditioned ve- Recirculate without A/C should not be used for in floor, defrost, or defrost/floor mode. At- hicles must be protected with a high-quality anti- long periods as fogging may occur.
  • Page 123 Control Setting Suggestions for Various Weather Conditions...

  • Page 124: Starting And Operating

    STARTING AND OPERATING • STARTING PROCEDURES ....124 • Normal Starting ......124 •...
  • Page 125 • PARKING BRAKE ......133 • ANTI-LOCK BRAKE SYSTEM ....134 •...
  • Page 126 • TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED ......146 • Base System — If Equipped ....147 •...
  • Page 127 STARTING PROCEDURES If Engine Fails to Start Tip Start Feature Turn the ignition switch to START position and Before starting your vehicle, adjust your seat, release it as soon as the starter engages. The adjust both inside and outside mirrors, and fasten WARNING! starter motor will continue to run, but will automati- your seat belts.
  • Page 128 AUTOMATIC TRANSMISSION With Tip Start WARNING! If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold Weather” It is dangerous to move the shift lever out of CAUTION! procedures, it may be flooded. To clear any PARK or NEUTRAL if the engine speed is higher Damage to the transmission may occur if the excess fuel, push the accelerator pedal all the...
  • Page 129 Automatic Transmission 4. Using the screwdriver, reach into the manual leaving the vehicle in this range. Always apply override opening. Press and hold the shift lock parking brake first, and then place the shift lever Shifting from DRIVE to PARK or REVERSE should lever down.
  • Page 130 drive for five-speed transmission). The transmis- The transmission will downshift from Overdrive to NEUTRAL Shift into NEUTRAL when the vehicle is standing sion will automatically shift from 3rd gear to Over- Drive if the accelerator pedal is fully depressed at for prolonged periods with the engine running.
  • Page 131 FOUR-WHEEL DRIVE OPERATION The “TOW/HAUL Indicator Light” will illuminate in A reset feature allows the vehicle to be driven to the instrument cluster to indicate when the switch an authorized dealer for service without damaging MP3022 Selec-Trac II Transfer has been activated. Pressing the switch a second the transmission.
  • Page 132 Use the transfer case NEUTRAL position for rec- WARNING! reational towing only. Refer to “Recreational Tow- ing” in this section for specific procedures on • You or others could be injured if you leave the shifting into and out of NEUTRAL. vehicle unattended with the transfer case in the Neutral (N) position without first fully en- CAUTION!
  • Page 133 driveshaft together and forces the front and rear NOTE: 2WD or 4WD Auto to 4WD Low wheels to rotate at the same speed. Additional When shifting into or out of 4WD LOW, some gear The “SERV 4WD” warning light monitors the traction and maximum pulling power for loose or noise may be heard.
  • Page 134 ON-ROAD DRIVING TIPS Driving Through Water 3. Move the 4WD Control Switch to the desired position. Utility vehicles have higher ground clearance and Although your vehicle is capable of driving a narrower track to make them capable of per- through water, there are a number of precautions 4.
  • Page 135 Hill Climbing (22 cm). The flowing water can erode the stre- Remember, never drive diagonally across a hill - ambed causing your vehicle to sink into deeper drive straight up or down. NOTE: water. Determine exit point(s) that are downstream If the wheels start to slip as you approach the Before attempting to climb a hill, determine the of your entry point to allow for drifting.
  • Page 136 PARKING BRAKE • Check threaded fasteners for looseness, par- PARK. Otherwise, the load on the transmission ticularly on the chassis, drivetrain components, locking mechanism may make it difficult to move To set the parking brake, pull the lever up as firmly steering, and suspension.
  • Page 137 ANTI-LOCK BRAKE SYSTEM WARNING! CAUTION! The Anti-Lock Brake System (ABS) is designed to aid the driver in maintaining vehicle control under Pumping of the Anti-Lock Brakes will diminish The Anti-Lock Brake System (ABS) is subject to adverse braking conditions. The system operates their effectiveness and may lead to an accident.
  • Page 138 ELECTRONIC BRAKE CONTROL • Engines may idle at higher speeds during NOTE: warm-up, which could cause rear wheels to SYSTEM Increased noise levels at the end of the steer- spin and result in loss of vehicle control. Be ing wheel travel are considered normal and do Your vehicle is equipped with an advanced elec- especially careful while driving on slippery tronic brake control system commonly referred to...
  • Page 139 active even if TCS and ESP are in the “Partial Off” WARNING! WARNING! mode or the “Full Off” mode. Refer to “ESP (Elec- tronic Stability Program)” in this section for more The Anti-Lock Brake System (ABS) cannot pre- The Brake Assist System (BAS) cannot prevent information.
  • Page 140 Hill Start Assist (HSA) wheel lift due to other factors, such as road WARNING! conditions, leaving the roadway, or striking ob- The HSA system is designed to help the driver jects or other vehicles. accelerate the vehicle from a complete stop while There may be situations where the HSA (Hill on an incline.
  • Page 141 tronic Vehicle Information Center (EVIC)” in completed properly, the “ESP/TCS Indicator” light WARNING! Section 4 of this manual. will blink several times to confirm HSA is disabled. • If you use a trailer brake controller with your • For vehicles not equipped with the EVIC, per- 10.
  • Page 142 erator pedal will increase vehicle speed in the Disabling HDC usual manner. When either the brake or the accel- 1. Press the “Hill Descent” button or shift the erator is released, HDC will control the vehicle at transfer case out of 4WD low range. The “Hill the original set speed.
  • Page 143 ESP/TCS Indicator Light Depending upon model and mode of operation, TCS Indicator” light will turn off. This will restore The ESP/TCS Indicator” light located the ESP system has up to three operating modes: the normal “ESP On” mode of operation. in the instrument cluster, starts to “ESP On”...
  • Page 144 turn on when the ignition switch is turned to the Full Off — 4WD Vehicles in 4WD High And NOTE: 4WD Low Range ON position. They should both turn off with the • “Full Off” is the only operating mode for ESP The “Full Off”...
  • Page 145 TIRES — GENERAL INFORMATION Safety Economy Improper inflation pressures can cause uneven Tire Pressure wear patterns to develop across the tire tread. WARNING! Proper tire inflation pressure is essential to the These abnormal wear patterns will reduce tread safe and satisfactory operation of your vehicle. •...
  • Page 146 Inflation pressures specified on the placard are limits or conditions are such that the vehicle can always cold tire inflation pressure. Cold tire infla- be driven at high speeds, maintaining correct tire tion pressure is defined as the tire pressure after inflation pressure is very important.
  • Page 148 WARNING! CAUTION! CAUTION! To avoid damage to your vehicle, tires, or chains, • Do not use a tire, wheel size or rating other Replacing original tires with tires of a different observe the following precautions: than that specified for your vehicle. Some size may result in false speedometer and odom- •...
  • Page 149 These cautions apply to all chain traction devices, mum inflation pressure molded into the tire including link and cable (radial) chains. sidewall. Refer to the “Tires – General Informa- tion” in this section for information on how to TIRE ROTATION RECOMMENDATIONS properly inflate the vehicle’s tires.
  • Page 150 − For example, your vehicle may have a rec- • Driving on a significantly under-inflated tire CAUTION! ommended cold (parked for more than three causes the tire to overheat and can lead to hours) placard pressure of 33 psi (227 kPa). tire failure.
  • Page 151 • Four Tire Pressure Monitoring Sensors Check TPMS Warning pressure warning limit, upon the next ignition key When a system fault is detected, the Tire Pressure cycle, a chime will sound and the TPM Telltale • Tire Pressure Monitoring Telltale Light Monitoring Telltale Light will flash on and off for 75 Light will turn ON.
  • Page 152 Premium System — If Equipped cally and the Tire Pressure Monitoring Telltale illuminate or the chime to sound. However, it will Light will turn OFF, as long as no tire pressure is cause a “SPARE LOW PRESSURE” message to The Tire Pressure Monitor System (TPMS) uses below the low-pressure warning limit in any of the display in the EVIC.
  • Page 153 sures, the system will automatically update, the Monitoring Telltale Light will no longer flash, and the EVIC will display a Low Pressure message and graphic display in the EVIC will stop flashing, and the CHECK TPM SYSTEM message will no a graphic showing the low tire pressure value the Tire Pressure Monitoring Telltale Light will turn longer display, and a pressure value will display in...
  • Page 154 a CHECK TPM SYSTEM message for three sec- not equipped with TPM Sensors. Then, drive the 300–220, which most countries use, and German onds and then display dashes (- -) in place of the vehicle for 10 minutes above 15 mph (25 km/h). BZT federal regulation 225Z125, which is based pressure value.
  • Page 155 facturer recommends the use of gasolines that CAUTION! CAUTION! meet the WWFC specifications if they are avail- able. DO NOT use gasolines containing Methanol or Use of fuel with ethanol content higher than 10% E85 Ethanol. Use of these blends may result in may result in engine malfunction, starting and Light spark knock at low engine speeds is not starting and driveability problems and may dam-...
  • Page 156 ADDING FUEL NOTE: CAUTION! • Tighten the gas cap until you hear a “click- Fuel Filler Cap (Gas Cap) • Damage to the fuel system or emission con- ing” sound. This is an indication that the gas The gas cap is located behind the fuel filler door trol system could result from using an im- cap is tightened properly.
  • Page 157 VEHICLE LOADING Gross Axle Weight Rating (GAWR) mined by weighing your vehicle on a commercial The GAWR is the maximum permissible load on scale before any occupants or cargo are added. Certification Label the front and rear axles. The load must be distrib- Loading As required by National Highway Traffic Safety uted in the cargo area so that the GAWR of each...
  • Page 158 Gross Trailer Weight (GTW) Gross Axle Weight Rating (GAWR) CAUTION! The Gross Trailer Weight (GTW) is the weight of The Gross Axle Weight Rating (GAWR) is the the trailer plus the weight of all cargo, consum- maximum capacity of the front and rear axles. Do not load your vehicle any heavier than the ables, and equipment (permanent or temporary) Distribute the load over the front and rear axles...
  • Page 160 Trailer Hitch Classification The following chart provides the industry standard Trailer Hitch Classification for the maximum trailer weight a given trailer hitch Your vehicle is capable of towing trailers up to Class Max. GTW class can tow. This should be used to assist you in 2,000 lbs (907 kg) without added equipment or (Gross Trailer Wt.) selecting the correct trailer hitch for your intended...
  • Page 161 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission Model Frontal Area Max. GTW (Gross Trailer Wt.) Tongue Wt. (See Note) 3.7L 64 sq ft (5.94 sq m) 3,500 lbs (1 588 kg) 350 lbs (159 kg) Refer to local laws for maximum trailer towing speeds.
  • Page 163 transmission, shift the transmission into RE- − Check for signs of tire wear or visible tire WARNING! VERSE. Always, block or chock the trailer damage before towing a trailer. Refer to “Tires- wheels. –General Information” in this section for infor- Improper towing can lead to an injury accident.
  • Page 164 Towing Requirements — Trailer Lights & CAUTION! Wiring Whenever you pull a trailer, regardless of the If the trailer weighs more than 1,000 lbs (454 kg) trailer size, stoplights and turn signals on the loaded, it should have its own brakes, and they trailer are required for motoring safety.
  • Page 165 Towing — 4WD Models NOTE: − Use speed control in flat terrain and with light loads to maximize fuel efficiency. The transfer case must be shifted into NEUTRAL Using the TOW/HAUL (3.7 L engine) or “4” for recreational towing. The NEUTRAL selection range (2.8 L diesel engine) feature while oper- Towing Tips —...
  • Page 166 is complete, and the NEUTRAL light turns on, • The ignition switch must be in the ON posi- WARNING! release the NEUTRAL button. tion for a shift to take place and for the position indicator lights to be operable. If You or others could be injured if you leave the 7.
  • Page 167 4. Turn the ignition switch to the ON position, but 8. Start the engine. NOTE: do not start the engine. • Steps 1 through 6 are requirements for shift- 9. Shift the transmission into DRIVE (automatic ing the transfer case. If these requirements 5.

  • Page 168: What To Do In Emergencies

    WHAT TO DO IN EMERGENCIES • HAZARD WARNING FLASHER ....166 • IF YOUR ENGINE OVERHEATS ....166 •...

  • Page 169: Hazard Warning Flasher

    HAZARD WARNING FLASHER JACKING AND TIRE CHANGING • In city traffic — while stopped, put transmission in NEUTRAL, but do not increase engine idle The Hazard Flasher switch is located in the switch speed. bank below the Climate Controls. WARNING! NOTE: Push and release the switch to turn on the •...

  • Page 170: Jack Location

    Jack Location • Set the parking brake and place the shift lever in PARK (automatic transmission) or REVERSE The scissor-type jack and tire changing tools are (manual transmission). located in the cargo compartment behind a trim cover on the left rear trim panel. The latch is •...

  • Page 171: Jacking Instructions

    Jacking Instructions 1. Remove spare tire. WARNING! 2. Remove jack and tools from mounting bracket. Carefully follow these tire changing warnings Assemble the tools by connecting the driver to the to help prevent personal injury or damage to extension, and then to the lug wrench. your vehicle: •...

  • Page 172: Jump-Starting

    JUMP–STARTING 7. Position the spare wheel/tire on the vehicle and install lug nuts with the cone-shaped end toward the wheel. Lightly tighten the nuts. To avoid the WARNING! risk of forcing the vehicle off the jack, do not • Take care to avoid the radiator cooling fan tighten the nuts fully until the vehicle has been whenever the hood is raised.

  • Page 173: Tow Eyes

    1. Wear eye protection and remove all metal 6. Connect the other cable, first to the negative 8. Start the engine in the vehicle that has the jewelry such as watchbands or bracelets that terminal of the booster battery and then to the booster battery, let the engine idle a few minutes, might make an unintended electrical contact.

  • Page 174: Towing A Disabled Vehicle

    TOWING A DISABLED VEHICLE CAUTION! WARNING! Proper towing or lifting equipment is required to The front tow eyes should be used for vehicle Stand clear of vehicles when pulling with tow prevent damage to your vehicle. Use of safety chains is recommended. Attach towing device towing on paved roads only.

  • Page 176: Maintaining Your Vehicle

    MAINTAINING YOUR VEHICLE • ENGINE COMPARTMENT — 3.7L ....176 • ONBOARD DIAGNOSTIC SYSTEM — OBD II ..177 •...
  • Page 177 • Power Steering — Fluid Check ....183 • Driveline and Steering Component Lubrication ..183 • Body Lubrication ..... . . 184 •...
  • Page 178 • Front Fog Light ......197 • Side Repeater Light ..... . 198 •...
  • Page 180 ONBOARD DIAGNOSTIC SYSTEM — SERVICE INFORMATION CAUTION! OBD II Mopar Fluids, Lubricants, and Parts are avail- • Prolonged driving with the MIL on could cause able from your local authorized dealer and will Your vehicle is equipped with a sophisticated help you keep your vehicle operating at its best.
  • Page 181 Service and Maintenance Cautions! Service and Maintenance Warnings! REPLACEMENT PARTS The use of genuine Mopar parts for normal/ scheduled maintenance and repairs is highly rec- CAUTION! WARNING! ommended to ensure the designed performance. • You can be seriously injured working on or To maintain your vehicle safely follow these Damage or failures caused by the use of non- around a motor vehicle.
  • Page 182 Checking the oil while the vehicle is on level Change Engine Oil NOTE: ground will improve the accuracy of the oil level Road conditions as well as your kind of driving Refer to the Maintenance Schedules in Section readings. Always maintain the oil level within the affect the interval at which your oil should be 8 for recommended engine oil and filter change SAFE zone on the dipstick.
  • Page 183 Engine Oil Viscosity Disposing of Used Engine Oil and Oil Filters Inspect belts for evidence of cuts, cracks, glaz- SAE 5W-20 engine oil is recommended for all Care should be taken in disposing of used engine ing, or frayed cords and replaced if there is operating temperatures.
  • Page 184 Under normal operating conditions, the catalytic WARNING! WARNING! converter will not require maintenance. However, it is important to keep the engine properly tuned to The air induction system (air cleaner, hoses, A hot exhaust system can start a fire if you park assure proper catalyst operation and prevent pos- etc.) can provide a measure of protection in the over materials that can burn.
  • Page 185 • Do not idle the engine for prolonged periods WARNING! CAUTION! during very rough idle or malfunctioning oper- ating conditions. • Battery fluid is a corrosive acid solution and • It is essential when replacing the cables on can burn or even blind you. Don’t allow battery the battery that the positive cable is attached •...
  • Page 186 NOTE: WARNING! WARNING! Use only manufacturer approved A/C System • Use only refrigerants and compressor lubri- Fluid level should be checked on a level surface Sealers, Stop Leak Products, Seal Condition- cants approved by the manufacturer for your and with the engine off to prevent injury from ers, Compressor Oil, and Refrigerants.
  • Page 187 Body Lubrication Operation of the wipers on dry glass for long To prevent freeze-up of your windshield washer periods may cause deterioration of the wiper system in cold weather, select a solution or mix- Locks and all body pivot points, including such blades.
  • Page 188 weather, where applicable). If coolant is dirty or ough rinsing to remove all deposits and chemi- WARNING! rusty in appearance, the system should be cals. Properly dispose of old antifreeze solution. drained, flushed, and refilled with fresh coolant. Exhaust gases can injure or kill. They contain Selection of Coolant Check the front of the A/C condenser (if carbon monoxide (CO) which is colorless and...
  • Page 189 Adding Coolant Cooling System Pressure Cap ingestion by animals or children, do not store Your vehicle has been built with an improved The cap must be fully tightened to prevent loss of ethylene glycol based engine coolant in open engine coolant that allows extended maintenance coolant, and to ensure that coolant will return to containers or allow it to remain in puddles on the intervals.
  • Page 190 compartment. This is normally a result of mois- • Do not change the thermostat for summer or and clamps have unique material characteristics ture from rain, snow, or high humidity accumu- winter operation. If replacement is ever neces- that provide adequate sealing and resist attack by lating on the radiator and being vaporized sary, install ONLY the correct type thermostat.
  • Page 191 abrasions, and excessive swelling suggest dete- WARNING! WARNING! rioration of the rubber. Particular attention should be made to examining those hose surfaces near- Worn brake hoses can burst and cause brake • Overfilling the brake fluid reservoir can result est to high heat sources, such as the exhaust failure.
  • Page 192 addition, avoid using transmission sealers as they CAUTION! CAUTION! may adversely affect seals. Using a transmission fluid other than the manu- Do not over-tighten the plugs. You could damage Transfer Case facturer’s recommended fluid may cause dete- them and cause a leak. Fluid Level Check rioration in transmission shift quality and/or The fluid level should be to the bottom edge of the...
  • Page 193 Lubricant Selection conditions will have an adverse effect on paint, • Use Mopar Cleaner Wax to remove road film, Use only manufacturer’s recommended lubricant. metal trim, and underbody protection. stains, and to protect your paint finish. Take Refer to “Fluids, Lubricants, and Genuine Parts” in care never to scratch the paint.
  • Page 194 • If your vehicle is damaged due to an accident Interior Care to clean leather upholstery. Application of a or similar cause, which destroys the paint and leather conditioner is not required to maintain the Instrument Panel Cover protective coating, have your vehicle repaired original condition.
  • Page 195 • Do not use any solvents or protectants on Yes When cleaning the rear view mirror, spray cleaner its life and appearance, and make successive Essentials products. on the towel or rag that you are using. Do not cleaning easier. Do not subject the top to exces- spray cleaner directly on the mirror.
  • Page 196 • Scrub in all directions, covering an area of brush, scrub in all directions over the stain. Avoid fuses and relays. A label that identifies each about two square feet at a time. Avoid heavy heavy scrubbing. Rinse the area with warm water. component is printed on the inside of the cover.
  • Page 197 Cavity Car- Mini- Description Cavity Car- Mini- Description Cavity Car- Mini- Description tridge Fuse tridge Fuse tridge Fuse Fuse Fuse Fuse 40 Amp — Anti-Lock Brake 60 Amp — Radiator Fan — 20 Amp Power Outlet #2 Green System (ABS) Yellow Yellow (BATT/ACC SE-...
  • Page 198 Cavity Car- Mini- Description Cavity Car- Mini- Description Cavity Car- Mini- Description tridge Fuse tridge Fuse tridge Fuse Fuse Fuse Fuse — — — — 15 Amp Exterior Lighting — 10 Amp Power Mirror Blue — Right Front Switch/ Driver —...
  • Page 199 REPLACEMENT LIGHT BULBS Cavity Car- Mini- Description CAUTION! tridge Fuse • When installing the Integrated Power Module Fuse LIGHT BULBS — Interior Bulb No. cover, it is important to ensure the cover is — 10 Amp Park Assist Mod- Cargo Light....WL212–2 properly positioned and fully latched.
  • Page 200 BULB REPLACEMENT Front Turn Signal Light Front Fog Light Headlight 1. Turn the steering wheel all the way to the right 1. Open the hood. to access the left front turn signal. Turn the steer- 2. Reach behind the headlight housing to access 1.
  • Page 201 Side Repeater Light Rear Tail/Stop, Turn Signal, Back-Up 6. Separate the back plate from the taillight hous- ing. and Fog Lights 1. Push the side repeater lens to one side to 7. Pull the appropriate bulb(s) out of the back release the spring tension and then pull it out- 1.
  • Page 202 VEHICLE SPECIFICATIONS NOTE: A chime will sound if the vehicle speed ex- ceeds 75 mph (120 km/h). It will continue to chime until the vehicle speed is reduced below 75 mph (120 km/h). Engine 3.7L Gas Power 155 kW @5,200 rpm Torque 312 N.m @3,800 rpm Maximum Vehicle Speed...
  • Page 203 FLUID CAPACITIES U.S. Metric Fuel (approximate) 3.7 Liter Engine 19.5 Gal 73.8 L Engine Oil-With Filter SAE 5W-20, API Certified 5 Qts 4.7 L Cooling System * Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula or equivalent. 14 Qts 13.2 L * Includes heater and coolant recovery bottle filled to MAX level.
  • Page 204 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Use API Certified SAE 5W-20 Engine Oil meeting the requirements of Chrysler Material Standard Engine Oil MS-6395.
  • Page 205 Chassis Component Fluids, Lubricants, and Genuine Parts Automatic Transmission Mopar ATF+4, Automatic Transmission Fluid. Transfer Case Mopar ATF+4, Automatic Transmission Fluid. Front Axle SAE 80W-90 Multipurpose Type, GL-5 Gear Lubricant or equivalent. Rear Axle SAE 75W-140 Synthetic Gear Lubricant or equivalent. Brake Master Cylinder/Manual Transmission Mopar DOT 3, SAE J1703 or equivalent should be used.

  • Page 206: Maintenance Schedules

    MAINTENANCE SCHEDULES • MAINTENANCE SCHEDULE — GASOLINE ENGINES ..... . . 204 • Severe Duty ......204 •...
  • Page 207 MAINTENANCE SCHEDULE — At Each Stop for Fuel CAUTION! GASOLINE ENGINES • Check the engine oil level about 5 minutes after To help you have the best driving experience a fully warmed engine is shut off. Checking the Failure to perform the required maintenance possible, the manufacturer has identified the oil level while the vehicle is on level ground will items may result in damage to the vehicle.
  • Page 208 Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter if using your vehicle under any of the severe duty conditions: Short trips, stop and go driving, dusty 3,000 5 000 or off-road conditions, police, taxi, fleet, or frequent trailer towing.
  • Page 209 Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Inspect and replace PCV valve if necessary. 90,000 150 000 Flush and replace the engine coolant. 102,000 170 000 Change the automatic transmission fluid &...

  • Page 210: If You Need Consumer Assistance

    IF YOU NEED CONSUMER ASSISTANCE • IF YOU NEED ASSISTANCE ....208...
  • Page 211 IF YOU NEED ASSISTANCE When you contact the distributor please • Selling and servicing authorized dealer. provide all of the following information: The manufacturers distributors are vitally inter- • Vehicle’s delivery date and current odometer ested in your satisfaction with their products and •...

  • Page 214: Index

    INDEX...
  • Page 215 About Your Brakes ....133 Appearance Care ....190 Emergency Starting ... . 169 ABS (Anti-Lock Brake System) .
  • Page 216 Caps, Filler Compass Calibration ..102,107 Diagnostic System, Onboard ..177 Fuel ..... 153 Compass Variance .
  • Page 217 Electronic Stability Program (ESP) ..98,139 Engine Oil Viscosity ... . . 180 Fluid Level Checks ....189 Electronic Throttle Control Warning Light .
  • Page 218 Fueling ..... 153 Bulb Replacement ... . . 197 Immobilizer (Sentry Key) ..13,15 Fuses .
  • Page 219 LATCH (Lower Anchors and Tether for Headlights On Reminder ..71 Transfer Case ....130 CHildren) .
  • Page 220 Marker Lights, Side ....197 Oil Change Indicator ..100,105 Pets, Transporting ....39 Master Cylinder (Brakes) .
  • Page 221 Rear Cup Holder ....85 Retractable Cargo Area Cover ..88 Height Adjustment ....65 Rear Park Sense System .
  • Page 222 Spare Tire ....167 Tachometer ....97 Tow/Haul Indicator Light .
  • Page 223 Transmitter Programming (Remote Vehicle Storage ....119 Window Fogging ....119 Keyless Entry) .

Table of Contents