Turning Lanesense On Or Off - Jeep CHEROKEE 2017 Owner's Manual

348 STARTING AND OPERATING

Turning LaneSense On Or Off

The default status of LaneSense is "off".
The LaneSense button is located on the switch panel below
the Uconnect display.
LaneSense Warning Button
To turn the LaneSense system on, push the LaneSense
button to turn the system on (LED turns off). A "Lane Sense
On" message is shown in the instrument cluster display.
Lane Sense On Message
To turn the LaneSense system off, push the LaneSense
button once to turn the system off (LED turns on).
NOTE: The LaneSense system will retain the last system
state, on or off, from the last ignition cycle when the
ignition is changed to the ON/RUN position.