Rena envelope imager III Instruction Manual page 3

This manual is for the person who is new to the Rena
Envelope Imager III Address Print Station and needs step-by-
step instructions to setup and operate the printer.
The appendix at the end of the manual has information for
those who are familiar with the Envelope Imager III and
simply want a quick reference or want more specific technical
information on the printer.
The first and second chapter introduces you to the components
of the printer and what accessories came with your new
printer. Chapter 3 runs you through the basics of how to setup
the printer to work with a feeder.
Once the printer has been assembled some adjustments are
necessary to maximize the performance of the printer. When
working with the address printer these chapters will give you
step-by-step instructions on what you need to do. Periodically
follow the general maintenance steps to keep the printer clean
and functioning properly. It is always a good idea to read
through the menu section before running the printer. This
section explains the options that are available to run a mailing
job.
The chapter on Troubleshooting contains a list of possible
problems you may encounter with the printer and their
solutions.
The appendices include a quick reference table for the
Envelope Imager III menus, a listing of the PCL commands
the printer recognizes, a hex chart to help work through a
HEX dump, and references of setting up the most popular
software to work with the printer. The final section has a list
of supplies available for your printer.
User's Manual - Revision C Introduction
Introduction
Who is this
manual for?
Sections 1 - 3
Sections 4 - 6
Section 7
Appendices