Software Interface Sample: Microsoft Word For Windows Ver. 2.0 - Rena envelope imager III Instruction Manual

Software interface sample:
Using you mouse Select FILE
Inside the pull down menu for File, Select NEW
Once New has been selected a pop up window will appear.
Scroll through the available documents using the down arrow, Select MAILLABL
Now Select OK
Now a new pop up window appears called Mailing Labels
Inside the Mailing Labels section, Select DOT MATRIX
Now another new pop up window appears called Dot Matrix Printer Label Sizes.
Scroll through the selection of product numbers for Avery Dot Matrix Labels,
Select 4600 ADDRESS
Then Select OK
Now another new pop up window appears called MicroSoft Word.
Select SINGLE LABEL
Now a new pop up window appears called Mailing Labels which depicts a sample
label for six (6) lines.
Type data into each line of the label address, TAB to go to NEXT LINE
When address data is completely entered, Select DONE
To print the sample label, select FILE
Inside the pull down menu for File, Select PRINT SETUP
Now a new pop up window appears called Print Setup
Select GENERIC/TEXT ONLY ON LPT1
Select OK
Select FILE
Inside the pull down menu for File, Select PRINT
User's Manual - Revision C
Appendix F Printing with Software
MICROSOFT
WORD FOR WINDOWS ver. 2.0
Section F - 25