Inkjet Cartridge Storage - Rena envelope imager III Instruction Manual

MANUALLY CLEANING INKJET CARTRIDGES
To manually clean inkjet cartridges, we recommend using a Cartridge Wipe material
(Rena part # 2023). This is a high quality, lint free material. We also suggest the use of
distilled water in the cleaning process. Please note that the use of "abrasive materials"
and water, which has mineral content in it, may cause damage to the ink cartridge nozzles
and or clog ink cartridge nozzles.
How to Manually Clean Ink Cartridges:
• Place a drop of distilled water on the edge of the Cartridge Wipe cloth.
• Start by placing the nose of the cartridge onto this wet area.
• Using a small amount of downward force, slowly pull the cartridge from the wet area,
across the dry area of the Cartridge Wipe, while slowly decreasing the amount of
downward force.
• Repeat this procedure a few times. Make sure you only clean the cartridge in one
direction. Either from the front of the head to the back of the head, or from back to
front.
Cartridge Wipes (Rena Part# 2023 = 100 wipes per pack) may be purchased through

INKJET CARTRIDGE STORAGE

Since there is no cartridge sealing station built in, when these printer's are not in use, the
inkjet cartridges must be removed, properly cleaned and sealed, in order to keep them
from drying and becoming clogged.
IMPORTANT!
Another reason for removing inkjet cartridges is to prevent the possibility that a cartridge
may leak ink into the printer, when the printer is not being used, and cause damage to the
printer. Rena Systems Inc. will not warranty printer damage caused by ink or other
foreign objects. Please be aware that "re-filled" ink cartridges have a much greater
probability of leaking than cartridges that have never been "re-filled".
Cartridge Storage Procedures
A cartridge storage stand is available for these ink cartridges, and six come with the
printer. If you require more, order Rena part # 141117. Remember to clean the cartridge,
as described previously, and also to clean the rubber pad in the storage stand, before
returning a cartridge to the stand. An optional storage method is to keep your CLEANED
cartridges in a plastic airtight container (i.e. Ziploc). A moistened Tex Wipe should be
place at the bottom of the container. Contacts and print heads should not touch anything.
Cartridge should also be cleaned prior to re-installing in the printer.
User's Manual - Revision C
Cleaning and Maintaining the Printer
your local Rena Dealer.
Section 5 - 2