2. Operation
Connecting the printer
Interface cable
Connection to
media feed unit
Power cable
Switching the printer on
\text\etd\DA615/operation
Plug the interface cable into terminal (9) on the right-hand side of
the printer for a parallel interface connection or into terminal (10)
for a serial interface connection. Then lock it and connect the cable
to your PC.
Connect the cable of the media feed unit to the connector supplied
(11b). Connect the cable to the control signal terminal (11a).
The DA615 is an instrument of
The printer may be operated only from grounded power outlets !
Plug the power cable into the right-hand side of the printer (6).
Switch the printer on via the power switch (7).
The display in the control
panel
(10)
shows
following brief message -
for initialization
When the printer is in on-
line
mode,
the
shown
on
the
appears (for example).
The messages are explained on the next page.
2.1
CAUTION!
Protection Class 1
DA615
the
Initialization
100% Cour12
display
On
FAST
right
Inkjet
000000
Set1U Nor
DA615 instruction manual