Download Print this page

Equinox Systems BLITZER User Manual page 4

Advertisement

Equinox Blitzer Strobe
You should find inside the Equinox carton the following items:
1, Equinox Blitzer Strobe
Technical Specifications:
DMX channels: 2
Voltage: AC 110-240V - 50-60Hz
Fuse: F1A-250V
Power consumption: 23W
Dimensions: 330 x 235 x 210mm
Weight: 2.1Kgs
Operations:
There are 4 operating modes to choose from:
1, Manual
2, Sound Active
Manual Mode
To run the Blitzer Strobe in Manual mode, press the 'MODE" button to show "F--" on the LED display.
Now to set the flash rate, use the "UP" and "DOWN" buttons and adjust the speed from 0-9. To set the
intensity press the "MODE" button to show "C--" on the LED display and use the "UP" and "DOWN"
buttons to adjust the brightness from 0-9.
Flash Rate: 0 = Slow, 9 = Fast
Intensity Levels: 0 = Off, 9 = Full on
Sound active Mode
To run the Blitzer Strobe in Sound active mode, press the 'MODE" button to show "S--" on the LED
display. To set the sensitivity level, use the "UP" and "DOWN" buttons and adjust the sensitivity from
0-9.
Sensitivity Levels: 0 = Low, 9 = High
DMX Mode
To run the Blitzer Strobe in DMX mode, press the 'MODE" button to show "Add" on the LED
display. Now use the "UP" and "DOWN" buttons to set the DMX address from 001 - 512.
Analogue controller connection
The Blitzer Strobe features 2 1/4" jack sockets (in/out) for analogue remote operation and allows for
several Blitzer Strobes to be linked together via using jack cable/s.
Control of the strobes is possible via analogue 10V signals.
TIP = +10V, Sleeve = Ground
To control the strobe/s via a analogue remote, you must set the strobe/s DMX address to 001.
Master/slave mode
Link the units together using a 3-pin XLR DMX cable, then press the "MODE" button to select one of the
above modes for the master unit. On the Slave unit/s press the "MODE" button to show "Add" on the
LED display. Now use the "UP" and "DOWN" buttons to set the DMX address to 001. The Slave unit/s
will then follow in sequence with the Master unit.
2, Instruction manual
3, DMX
4, Master/slave
Technical specifications

Advertisement

loading