5
UTILITY PACKAGE (GX Configurator-TI)
5.4
Initial Setting
[Purpose]
Make initial setting for operating the Q68TD-G-H02(H01) on each channel.
Refer to Section 5.1 for the initial setting parameter types.
Setting parameters in the Initial setting screen can omit parameter settings in
sequence programs.
[Operating procedure]
"Start I/O No.
[Setting screen]
[Explanation of items]
(1) Setting contents
Set whether temperature conversion is enabled or disabled and the temperature
conversion method for each channel.
(2) Command buttons
*1
"
"Module type"
* 1
Enter the start I/O No. in hexadecimal.
Figure 5.9 Initial setting
Creates a file containing the screen data in text file format.
Saves the set data and ends the operation.
Cancels the setting and ends the operation.
"Module model name"
5.4 Initial Setting
1
2
3
4
5
6
7
8
5
- 13