3
SPECIFICATIONS
3.4.24
This area is used to switch the mode between normal mode and offset/gain setting mode.
This mode can be switched without resetting the programmable controller CPU.
Setting methods
3
- 58
3.4 Buffer Memory
3.4.24 Mode switching setting (Un\G158, Un\G159)
Mode switching setting (Un\G158, Un\G159)
(a) Set the setting value of the switching target mode.
Switching target mode
Normal mode
Offset/gain setting value mode
(b) To switch the mode, turning on Operating condition setting request (Y9) after
setting the value is required.
(c) When the mode is switched completely, this area for Un\G158 and Un\G159 is
cleared to "0".
POINT
If a value other than the setting values in Table 3.17 is written, mode switching is
not performed.
Table 3.17 Switching target mode and setting value
Un\G158
0964
4144
Setting value
Un\G159
4144
H
0964
H
H
H