Environmental Conditions; Declaration Of Conformity - Thermo Scientific Cimarec HP130914 Operation Manual And Parts List

Declaration of Conformity

(for 220-240 volt, -33 CE models only)
We hereby declare under our sole responsibility that this product conforms with the technical requirements of
the following standards:
EMC:
Safety:
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC, as amended by 92/31/EEC and
93/68/EEC, and per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Thermo Fisher Scientific
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available upon request.

Environmental Conditions

Operating:
Storage:
EN 61000-3-2
EN 61000-3-3
EN 61326-1
EN 61010-1
EN 61010-2-010
17°C to 27°C; 20% to 80% relative
humidity, non-condensing.
Installation category II (overvoltage) in accordance
with IEC 664.
Pollution degree 2 in accordance with IEC 664.
Altitude Limit: 2,000 meters.
-25°C to 65°C
10% to 85% relative humidity
Limits for harmonic current emissions
Limits for voltage fluctuations and flicker
Electrical equipment for measurement, control, and
laboratory use; Part I: General Requirements
Safety requirements for electrical equipment for
measurement, control, and laboratory use;
Part I: General Requirements
Part II: Particular requirements for laboratory equipment for
the heating of materials
S
PECIFICATIONS
7