Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Thermo Scientific Super-Nuova S133320-33
Summary of Contents for Thermo Scientific Super-Nuova S133320-33
- Page 1 Super-Nuova Stirrers SerIeS 1333 and 1339 operation Manual and parts List Model # Voltage Description S133320-33 220-240 S133324 S133325 S133930-33 220-240 10x10 S133934 10x10 S133935 10x10 LT1333X1 • 27/04/10...
-
Page 2: Table Of Contents
Table of Contents Safety Information ..............................3 alert Boxes ..............................3 Warnings ..............................3 General Specifications ............................5 Stirring Speed Specifications ........................6 environmental Conditions ..........................7 Declaration of Conformity ..........................7 Introduction................................8 General usage..............................8 unpacking and Installation ..........................9 unpacking ..............................9 Installation ..............................9 principles of operation ............................11 operation ................................12 power Button ..............................12 Setting the Stirring Speed ..........................12... -
Page 3: Safety Information
Safety Information Your Thermo Scientific Super-Nuova stirrer has been alert Signals designed with function, reliability, and safety in mind. It is your responsibility to install it in conformance with local electrical codes. For safe operation, please pay attention Warning to the alert signals throughout the manual. - Page 4 afeTy NforMaTIoN Do not remove or modify grounded power plug. use only properly grounded outlets to avoid shock hazard. use appropriate hand and eye protection when handling hazardous chemicals. Gross weight of items placed on top of stirrers should not exceed 35 lbs. (15.9 kg.) on the 10” x 10”...
-
Page 5: General Specifications
General Specifications 7" X 7" Model Number S133325 S133320-33 S133324 overall Dimensions in. (cm) Width 8.2” (20.8 cm) 8.2” (20.8 cm) 8.2” (20.8 cm) Height 3.8” (9.7 cm) 3.8” (9.7 cm) 3.8” (9.7 cm) Depth 13.0” (33.0 cm) 13.0” (33.0 cm) 13.0”... -
Page 6: Stirring Speed Specifications
eNeral PeCIfICaTIoNS Stirring Speed Specifications Speed range 50 to 1200 rpM (Maximum speed is dependent on the viscosity of the solution) Stability of the stirring speed setpoint (600 ml of water in a 1000 ml glass flask above 200 rpm) ± 2.0% accuracy of the stirring setpoint (600 ml of water in a 1000 ml glass flask above 200 rpm) ±... -
Page 7: Environmental Conditions
eNeral PeCIfICaTIoNS environmental Conditions operating: 0°C to 27°C; 20% to 80% relative humidity, non-condensing. Installation category II (overvoltage) in accordance with IeC 664. pollution degree 2 in accordance with IeC 664. altitude Limit: 2,000 meters. Storage: -25°C to 65°C 10% to 85% relative humidity Declaration of Conformity (for 220-240 volt, -33 Ce models only) We hereby declare under our sole responsibility that this product conforms with the technical requirements of... -
Page 8: Introduction
Introduction please read all the information in this manual before operat- ing the unit. Your Super-Nuova stirrer is a stirring plate designed for laboratory procedures requiring precise control of stirring speed. each Super-Nuova model includes a digital dis- play for monitoring stirring speed. The stirrer will accurately maintain stirring speeds from 50 rpm up to 1200 rpm. -
Page 9: Unpacking And Installation
unpacking and Installation unpacking Warning remove your Super-Nuova stirrer from the carton. use a properly grounded electrical Inspect to ensure that the unit has not been damaged outlet of correct voltage and current during shipment. If the unit appears to have sustained handling capacity. -
Page 10: Installation
Installation Set the unit on a flat stable surface at least 12" away from combustible materials, and plug the cordset into a proper- ly grounded electrical outlet of correct voltage and current handling capacity. - Page 11 NPaCkING aND NSTallaTIoN RS232 Port Connections Cord retention clip Speed Set Power Button Button Speed Display STIR STIR POWER POWER Writable Preset Surface* Pause Button PAUSE TIMER TIMER PRESETS PRESETS Timer Indicator Lights ADJUST (hours) ™ ™ SUPER-NUOVA SUPER-NUOVA Preset Buttons Timer Pause...
-
Page 12: Principles Of Operation
principles of operation each Super-Nuova unit utilizes the latest microproces- sor technology to deliver the most reliable, accurately controlled, ceramic top stirrer on the market. The electronic stirring speed control will maintain the speed setpoint when the unit is loaded. The motor is com- bined with a powerful magnet to provide exceptional mag- netic coupling with a stir bar. -
Page 13: Operation
operation power Button Warning The Super-Nuova unit has a power button located on These stirrers are not explosion proof. the front control panel. The unit may be powered on by Fire or explosion may result. unit con- pressing the power button or aNY button on the control tains components which may ignite panel. -
Page 14: Using Preset Programs
PeraTIoN using preset programs The Super-Nuova stirrer features the option of preset- ting 4 setpoints into its memory. To program a preset, adjust the stir feature to your desired setpoints. press and hold one of the presets and the unit will beep indicating those setpoints have been stored in memory. -
Page 15: Rs232 Output
PeraTIoN rS232 output an rS232 port is available on the Super-Nuova to output elapsed time and speed data. The data is printed once every second when the unit is powered on (displays on). a comma separates each piece of data so that it may easily be import- ed into a spreadsheet as CSv (Comma Separated values). -
Page 16: Using Hyperterminal W/Rs232
PeraTIoN using HyperTerminal w/rS232 With HyperTerminal you can store the rS232 output data of a Super-Nuova on a pC. NoTe: other terminal pro- grams that capture rS232 data can be used as well. In order to follow this procedure, you must have: •... -
Page 17: To Capture Data W/Hyperterminal
PeraTIoN Select FILe, Save aS, and save this setup wherever you would like it to be located (if you would like it on the Desktop, select Desktop) and select Save. You will be able to run HyperTerminal with this setup in the future by just double-clicking the icon if you put it on the Desktop. -
Page 18: Service And Calibration
Service and Calibration Service Menu The Service Menu has many features that will allow a user to customize their unit. a table of the features available in the Service Menu is given below. The features are given in order of their appearance in the Service Menu when rotating the center knob in a clockwise rotation. -
Page 19: Timer Shutdown - End
erVICe aND alIBraTIoN Timer Shutdown - end This feature is available for all units, but not all sub-menu Note options will be applicable. The purpose of this feature is For most routines, the poWer key to control what is turned off when the timer elapses. The can be used to return to a previous default is heating off for hot plates and stir plates, and menu if desired. -
Page 20: Error Disable - Err
erVICe aND alIBraTIoN error Disable - err This feature is available for all units, but not all sub-menu options will be applicable since some errors relate to heating or stirring only. The purpose of this feature is to enable or disable a particular error from being detected and displayed. -
Page 21: Factory Defaults - Def
erVICe aND alIBraTIoN Factory Defaults - deF This feature is available for all units and is designed to restore the control to the default factory settings. NoTe: The Model Selection feature will need to be re-visited after resetting the factory defaults (see Model Selection below). -
Page 22: Flash Upgrade - Fls
erVICe aND alIBraTIoN rotate the center knob until the display reads Sel. press the SeT key under the display to accept, and the display will change to SP (Stir plate), HP (Hot plate), or S (Stirrer). rotate the center knob to change the display to the type of unit required and press the SeT key under the display again. -
Page 23: Error Codes
Troubleshooting error Codes u l i . t i r r i u l i u l i . t i u l i c i t c i t u l i u l i z i l errors e11 and e12 are stirring errors. error Handler will lock out stirring functions if stirring error is detected. pressing the poWer button or unplugging the unit will clear error e12. -
Page 24: Exploded Views
exploded views 220-240v models only 10x10 Stirrer - Exploded View... - Page 25 XPloDeD IeWS 10x10 Stirrer- Top Assembly...
- Page 26 XPloDeD IeWS 220-240v models only 7x7 Stirrer - Exploded View...
- Page 27 XPloDeD IeWS 7x7 Stirrer- Top Assembly...
-
Page 28: Wiring Diagram
Wiring Diagram COMPONENT CHART REF. DESCRIPTION (7x7) (10x10) INLET CEX373 CEX373 RS232 WH1318X1 WH1318X1 F1 (220-240 ONLY) FUSE 261575 261575 MT1 (100-120V) MOTOR MT1318X1 MT1338X1 MT1 (220-240V) MOTOR MT1318X2 MT1338X2 PC1 (100-120V) CONTROL PCB PC1333X2 PC1339X2 PC1 (220-240V) CONTROL PCB PC1333X3 PC1339X3 DISPLAY PCB... -
Page 29: Replacement Parts List
replacement parts List 7x7 Part No. 10x10 Part No. Description 261575 261575 pC Board Fuse - 220-240v FTX34 FTX34 Foot (4) pC1333X2 pC1339X2 Control Board - 100v, 120v pC1333X3 pC1339X3 Control Board - 220-240v 266058 266058 pC Board Fuse - 100v, 120v 261575 261575 pC Board Fuse - 220-240v... -
Page 30: Accessories
accessories Part No. Description 711S Non-Mercury Thermometer 20 to 100°C range - 76 mm immersion 647-1S Non-Mercury Thermometer 0 to 110°C range - 35 mm immersion 1007-3BLS Non-Mercury Thermometer -1 to 201°C range - 76 mm immersion 615-3SC Mercury Teflon Coated Thermometer -10 to 200°C range - 76 mm immersion 260CW-3BLS Non-Mercury Thermometer -10°C to 260°C range - 76 mm immersion erT605... -
Page 31: Ordering Procedures
ordering procedures please refer to the Specification plate for the complete model number, serial number, and series number when requesting service, replacement parts or in any corre- spondence concerning this unit. all parts listed herein may be ordered from the Thermo Scientific dealer from whom you purchased this unit or can be obtained promptly from the factory. -
Page 33: Warranty
(ii) misuse (including use inconsistent with written operating instructions for the product), mishandling, contamination, overheating, modification or alteration of the product by any customer or third party or (iii) use of replacement parts that are obtained from a party who is not an authorized dealer of Thermo Scientific prod- ucts.
Need help?
Do you have a question about the Super-Nuova S133320-33 and is the answer not in the manual?
Questions and answers