Thermo Scientific Cimarec HP130914 Operation Manual And Parts List page 4

S I
AFETY NFORMATION
4
nents which may ignite such materials.
3. Keep top surface clean. Use a non-abrasive
cleaner. Alkali spills, hydrofluoric acid spills or
phosphoric acid spills may damage top and lead
to thermal failure. Unplug unit and remove spills
promptly. Do not immerse unit for cleaning.
4. Replace the top immediately if damaged by
etching, scratching or chipping. A damaged top
can break in use.
5. Do not use metal foil on hot plate which may
block air flow. Overheating will result.
6. Check and tighten the removable cord periodi-
cally making sure it is secure. If loosened, the
cord could become hot and/or spark and be a
potential fire hazard. If cord appears damaged,
replace immediately. If cord is repeatedly loos-
ened it is recommended to purchase the cord
retaining clip (part number AY1313X1 or
AY1313X2) listed in the Replacement Parts sec-
tion of this manual.
7. Do not remove or modify grounded power plug.
Use only properly grounded outlets to avoid
shock hazard.
8. Use appropriate hand and eye protection when
handling hazardous chemicals.
9. Gross weight of items placed on top of hot
plates should not exceed 35 lbs. (15.9 kg.) on
the 10" x 10" models, 25 lbs. (11.3 kg) on the 7"
x 7" models, and 15 lbs. (6.8 kg.) on the 4" x 4"
models.
10. "Caution: Hot Top. Avoid Contact." The top plate
of the unit can remain hot for some time after
use. A "CAUTION - HOT TOP" light will remain
on until top plate temperature cools to below
50°C.
11. Note that the exterior housing will be hot during
and for a period of time after use.
12. Refer servicing to qualified personnel.