Table of Contents
Advertisement
Optical Parts Disassembly
Before taking this procedure, remove Cabinet Top , Cabinet Front and Main Board following to the "Mechanical Disas-
sembly" .
Disassembly requires a 2.0mm hex wrench.
Note: The optical unit should be removed from the cabinet bottom before removing the projection lens.
z Integrator lens-in disassembly
(M2.5x5)x2
x Relay lens-out disassembly
(M2.5x5)x2
Integrator Lens-In Ass'y
Fig.1
Relay lens-out Ass'y
Fig.2
Integrator lens-in
* Rugged surface
(Behind)
-16-
Hooks
Spring
Relay lens-out
Advertisement
Table of Contents
