Optical Parts Disassembly
Before taking this procedure, remove Cabinet Top and Main Board following to the "Mechanical Disassembly".
Disassembly requires a .0mm hex wrench.
1. LCD Panel/Prism assy removal
Fig.1
*Note on handling the LCD Panel/Prism Assy
LCD Panel, Polarized glasses are very sensitive parts.
Never touch or wipe the surface. When removing the dust on the surface, use a commercial (inert gas) air
spray to remove them.
LCD Panel/
Prism assy
(M3x10)
(Bottom side)
-19-