Table of Contents
Advertisement
Optical Parts Disassembly
m Locations and Directions
When mounting or assembling the optical parts in the op-
tical unit, the parts must be mounted in the specified loca-
tion and direction as shown in figure below.
1
2
3
Point marker is
printed on this
side up
4
Point marker is
printed on this
side up
5
6
7
8
528
-21-
No.
Parts Name
1
Integrator lens (OUT)
2
Prism beam splitter (PBS)
Condenser lens (OUT)
4
Dichroic mirror (B)
5
Dichroic mirror (G)
6
Condenser lens (G)
7
Relay Lens (IN)
8
Mirror (R)
9
Condenser lens (R)
10
Condenser lens (B)
11
Mirror (B)
Rugged surface
is facing this
side.
Film attached
side is facing this
side.
527
11
10
9
8
Fig.7
Advertisement
Table of Contents
