Table of Contents
Advertisement
Mechanical Disassembly
b Power, Ballast, Lamp Cover Sw Board, Thermal Sw(SW902) removal
1. Remove the 2 screws A( Tx8) (top side), remove the 2 screws B (Tx8)
(bottom side) and remove screw G(Tx6) to remove the Power board assy.
2. Remove the Isolation sheet.
. Remove 2 screws C(Tx6) to remove the Ballast board.
4. Remove the screw E (Tx6) and remove the Lamp cover switch board.
remove the screw F (Tx6) and remove the thermal switch (SW902).
A
C
Power board
Ballast board
B
-15-
Isolation sheet (2 sheets)
G(Tx6)
C(Tx6)x2
A(Tx8)x2
Lamp cover
switch board
F (Tx6)
E (Tx6)
B (Tx8)x2
Thermal switch
(SW902)
Fig.5
Advertisement
Table of Contents
