Aastra 9480i User Manual page 146

Managing Calls
9. Click Basic Settings->Account Configuration.
The illustration above shows 2 accounts configured on the phone. Accounts must be set up by your System Admin-
istrator.
10. For each account, enable the CFWD state by placing a check mark in one or more of the following "State" fields:
• All
• Busy
• No Answer
The "All" option forwards all incoming calls for this account to the specified phone number regardless of the state of
the phone. The phone can be in the Busy or No Answer states, or can be in the idle state. The phone still forwards all
calls to the specified number.
The "Busy" option call forwards incoming calls only if the account is in the busy state. The calls are forwarded to the
specified phone number.
The "No Answer" option call forwards incoming calls only if the account rings but is not answered in the defined
number of rings. The call gets forwarded to the specified number.
Note:
You can use the "Busy" and "No Answer" states together using different forwarding phone numbers. If these states
are enabled for an account (the "All" state is disabled), and the phone is in the busy state when a call comes in, the
phone can forward the call to the specified phone number (for example, voicemail). If there is no answer on the
phone after the specified number of rings, the phone can forward the call to a different specified number, such as a
cell phone number.
139
41-001382-00 REV01 – 06.2013