Initializing The Kem - Avaya KEM User Manual

Initializing the KEM

Once the IP Deskphone KEM has been installed and powered up on your
IP Phone 2002 or 2004, the IP Deskphone KEM initializes. When this
occurs, the IP Deskphone KEM display lights up and flashes until it
establishes communication with the IP Phone. When initialization is
completed successfully, the additional line/feature keys on the
IP Deskphone KEM are ready to use.
Note 1: If the IP Deskphone KEM display does not stop flashing or
does not display key labels, contact your system administrator.
Note 2: If you install two IP Deskphone KEMs on your IP Phone, the
one directly attached to the IP Phone (to the immediate right of the
IP Phone) must be functional for the second IP Deskphone KEM to
operate. This is because the second IP Deskphone KEM uses the
first IP Deskphone KEM to receive its power and communicate with
the IP Phone.
Initializing the KEM
13