Interconnections And Cable Handling; Power Cables; Alarm Cable - Ericsson Marconi OMS 870 Quick Reference Manual

When the switch is activated, the module is disabled in SW, and the
MOD FAIL LED is switched off (for modules carrying IP, the LED
blinks during SW cleanup, and extinguishes afterwards).The
module can now be removed. Please see Figure 7
Figure 7 Remove module using the Card Extraction Tool
1.8

Interconnections and cable handling

1.8.1

Power cables

A power cable is provided together with the OMS 870 Base Unit.
The cable is optimised for use in racks but can also be used in wall
mount and desktop applications.
The cable connects the OMS 870 to the internal power-rails inside
the rack.
1.8.2

Alarm cable

Ericsson does not provide an alarm cable. The physical connector is
a 9 pin DSUB. The alarm cable would typical be used to connect the
OMS 870 to the rack-top alarm indicators or to external alarm input
sources.
1/1531-CRA 119 0513/30 Uen A 2007-11-15
Marconi OMS 870 R3.0 Quick Reference Guide
1-19