Marconi OMS 870 R3.0 Quick Reference Guide
Figure 12 Inserting an SFP module into an SFP module slot
4. Remove the dust plugs from the optical ports on fiber-optic SFP
N O T E !
1.9.5
Removing SFP modules
To remove an SFP module from a module slot, follow these steps:
1. Disconnect the cable from the SFP module.
Note which connector plug is send (TX) and which is receive (RX) in
T I P
1-30
modules and store them for later use.
When you are ready to connect the cable, remove the dust
plugs from the fiber-optic SFP module port and the rubber
caps from the fiber-optic cable. The plugs and caps protect
the SFP module ports and cables from contamination and
ambient light.
case you re attach the of fiber-optic cables.
1/1531-CRA 119 0513/30 Uen A 2007-11-15